494266

Marmitek MT20 Manual

15
Zoom out
Zoom in
Previous page
1/112
Next page
ENGLISH
MT20™
15
If (while in Prog/Review Mode) one of the 4 module ON (or OFF) buttons is pressed
without modifying the current time, and events do exist, each press of the module
ON (or OFF) button cycles through (and displays) all the ON (or OFF) events for that
particular module. I.E. you are "Reviewing" the times that are set. The display also
shows whether the event is a Once event or a Security event. Note if it's a Security
event the actual time that the next event will occur will be shown. If neither Once nor
Security is displayed, the event is a Daily event.
If (while in Prog/Review Mode) one of the 4 module ON (or OFF) buttons is pressed
after modifying the current time, then the time is stored as a new event for that
module. I.E. you can program new events while reviewing the current programmed
events.
While displaying any time for any module it can be deleted using the Clear key. All
events for a module can be cleared by pressing Clear multiple times until the display
shows 0:00.
If an event time is modified and you do not want to store it to any module ON/OFF
button, press Clear. The previous event is now displayed and can be deleted if desired
by pressing Clear again.
If the Mode switch is moved after a time has been changed and without a module
ON/OFF button being pressed, this time is discarded and is not stored in memory.
If the display shows FULL
If FULL is displayed when you try to enter a programmed time, this means that you
have tried to enter an additional time when you have already used up all the available
memory. Cancel one or more of your set times by pressing a number ON (or OFF)
button, then press Clear to clear that event. Then enter another timer event.
Selector switch
1-4 position - With the “Selector” switch in the 1-4 position the 4 ON and
OFF buttons control (and set times for) Modules set to Unit Codes 1 thru 4
respectively.
5-8 position - With the “Selector” switch in the 5-8 position the 4 ON and
OFF buttons control (and set times for) Modules set to Unit Codes 5 thru 8
respectively.
Instantly Controlling Modules
With the Mode switch in the RUN position you can slide the Selector Switch back and
forth to instantly control Modules set to 1 thru 4, or 5 thru 8. Also, in the Prog
Set/Review mode you can set events for modules 1 thru 4, then move the selector
switch and program more events for modules 5 thru 8. See note at Setting something
to happen every day at the same time for maximum number of events you can
program..
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek MT20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek MT20 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info