Manual Marmitek MT20 (page 12 of 112) (English, German, Dutch, French, Italian, Spanish)

494266

Zoom out

Zoom in

1/112

SETTING UP THE MINI TIMER

Setting the clock

Plug the Mini Timer into any convenient AC outlet. Fit two AA alkaline batteries in the

battery compartment to protect the time and program for up to 48 hours in the event

of a power outage. If the battery is low, dead, or not installed, the low battery

indicator will show in the display.

When you first plug in the Mini Timer the display will flash. It will also flash if you have

had a power outage and have not installed two AA alkaline batteries or if the

batteries are dead.

1. Set the mode switch to “Clock Set.”

2. Press the top of the “Time” rocker to advance to the correct time. A

quick press on the rocker will advance the time by 1 minute. If you hold the

rocker down the display will advance to the correct time faster. If you

overshoot, you can use the bottom rocker to go back.

Controlling x-10 modules

Follow the steps below to make sure you can control your Modules before you

program the Mini Timer.

1. Install and set up all of your Marmitek X-10 Modules referring to the instructions

included with them. Be sure to turn off the power at the main circuit breaker

panel when installing Wall Switch Modules or Micromodules.

2. Set all of your Modules to the same Housecode as the Mini Timer (default is A).

3. Set each Module to a Unit Code Between 1 and 8.

4. Set the Mode Switch on the Mini Timer to the “RUN” position.

5. To turn On a particular Module, set the selector switch to 1-4 or 5-8, then press the

ON button corresponding to the number you set on the Module you want to control.

Then press and hold Bright or Dim to brighten or dim the light (Lamp/dimmer

Modules only).

6. To turn Off a particular Module, set the selector switch to 1-4 or 5-8, then press

the OFF button corresponding to the number you set on the Module you want to

control. The display shows On or Off next to the module number for the button you

pressed.

To turn on ALL lights connected to Lamp Modules and Wall Switch Modules (with

the same Housecode as the Mini Timer), press the “All Lights On” button. This does

not affect appliances.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek MT20 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marmitek MT20 Manual

Product: