494266

Marmitek MT20 Manual

11
Zoom out
Zoom in
Previous page
1/112
Next page
MT20™
11
ENGLISH
ery day.
rning).
7. All Lights On Button. Instantly turns on ALL Lamp/dimmer Modules.
How to program a timed event
1. Place the mode switch in “Prog Set/Review” position.
2. Advance to the desired time.
3. Set the 1-4/5-8 switch to the desired position.
4. Press any of the 4 ON or OFF buttons to set an On or Off time for that Module. This
will program the Mini Timer to turn that Module on (or off) at that time every day.
5. Advance to another time, and press another ON or OFF button as desired.
6. Set the Mode switch back to RUN.
Special programming buttons
1. Mode button. If within 4 seconds after setting an On or Off time, you press the
“Mode” button once or twice until Once shows in the display, you will
modify the program to carry out your programmed event only Once and it
will not repeat on the next day.
Press again (within 4 seconds after setting an On or Off time) until Security is
shown in the display, to modify the program so that your lights (or appliances) will go
on or off at a slightly different time every day (within the programmed hour). With
each press the display shows whether you've selected Once, or Security. If neither
Once nor Security is displayed, the event happens at the same time ev
2. Clear Button. Pressing this (in the Prog/Review Mode) cancels the On time or Off
time being displayed.
3. Wakeup Switch. In the “ON” position an internal wake up buzzer will sound at
the time programmed for Module number 1. When this sounds you can turn
it off by pressing any button to obtain the “snooze” feature. This will turn
the buzzer back on in 10 minutes and will do so each time you operate
snooze.
The alarm can be cancelled by moving the Buzzer switch to “OFF” and back
to “ON” (for wake up the next mo
4. Selector Switch. Used to select whether you want your Mini Timer to instantly
control Modules set to Unit Codes 1 thru 4 or 5 thru 8. You can move the
selector switch back and forth to achieve instant control of 8 X-10 Modules.
You can also move the switch during programming to select which modules
(1-4 or 5-8) you are setting times for.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek MT20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek MT20 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info