494268

Marmitek MS13 Manual

7
Zoom out
Zoom in
Previous page
1/40
Next page
• 4 flashes for 8 minutes.
• 5 flashes for 16 minutes.
• 6 flashes for 32 minutes.
• 7 flashes for 62 minutes.
• 8 flashes for 128 minutes.
• 9 flashes for 255 minutes.
• Release the <unit/off> button.
• Now press the <unit/off> button the number of times that corresponds to the mode that you want to
set. On the last press hold down the button (e.g. for a 4-minute delay press the <unit/off> button 3
times and hold the button down on the third press)
After 3 seconds the LED will display the new setting and the LED will switch off.
The MS13 saves the settings in non-volatile memory so that the settings are kept when the batteries are
changed.
NOTE: The MS13 cannot activate alarm functions on Marmitek Alarm systems. Use the MS90 for this.
FREQUENTLY ASKED QUESTIONS
What is the reason for modules to switch on/off spontaneously?
It is possible that a Marmitek X-10 System is installed at one of your neighbours using the same House
Code. To solve this problem try to change the House Code of your system, or have FD10 Phase
Coupler/Filter installed at your incoming mains.
My modules will not respond to my controller.
Make sure that the House Code on all Modules and Controllers are set to the same House Code (A .. P).
My modules will not react to my remote / sensor.
When you use a remote or sensor, you should have at least one TM13 Transceiver or Marmitek Security
Console installed in your house. These components will translate the radio signals to the Marmitek X-10
signal on the power line. Only one Transceiver should be installed for all remotes and sensors set to the
same House Code.
Am I able to increase the range of my remotes by using more Transceivers?
Yes, you can use more than one TM13 Transceiver in your home when the range of your remotes is not
sufficient. The TM13 is using so called collision detection to prevent signals to be disturbed when more
than one TM13 is transmitting. TM13’s will wait for a quite power line before transmitting their data. To
prevent your Marmitek X-10 System to become slow or to prevent dimming from becoming less smooth,
make sure that the TM13 units are placed as far away from each other as possible.
Do you still have questions?
Please check out www.marmitek.com for more information.
TECHNICAL SPECIFICATIONS
Power supply: 2x AAA battery
RF frequency: 433.92 MHz
RF Range: Up to 30m free field, up to 20m through walls and ceilings
RF Power: 1mW
PIR range: 45º - 5 metres, straight ahead - 12 metres
Ambient temperature: - 10°C to + 30° C (operation) - 20°C to + 70° C (storage)
Dimensions: 67x67x27mm
7MS13
TM
ENGLISH
manual MS13 05-12-2006 09:54 Pagina 7
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek MS13 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek MS13 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info