613347

Marmitek Megaview70 Manual

7
Zoom out
Zoom in
Previous page
1/68
Next page
ENGLISH
7Megaview70™
5. SELECTING THE CHANNEL
The added Audio/Video-signal (of for instance a DVD-player or AV-camera) is converted into
a normal TV-channel.
With the MegaView70 you can actually choose every free channel. It is important to choose
a free channel, which is not yet in use by an existing TV-channel. Which channels are free
depends on the incoming antenna signal. For this, consult the channel chart provided by your
cable company, or if you have your own antenna, the channel overview in your TV-guide.
1. Connect the power adapter to the modulator and plug this in the socket.
2. Take your channel chart and look for two free adjacent channels. Then you choose the
higher of these two channels. Example: when channel 37 and 38 are free, you should
choose channel 38. With three free adjacent channels, you should choose the middle one.
3. Press the Mode key a few times until you see ‘CH’ appear on the display. Then ‘CH’ will
disappear again and a number will appear. Use the ▲ and the ▼ keys on top of the
modulator to select the chosen channel. The illuminated digital display on top of the panel
shows this channel.
4. Now switch on the desired A/V device (DVD, VCR, satellite receiver, PC, camera, etc.).
5. Turn on the TV, and find the selected channel. How to do this can be read in the manual
of your TV. If you cannot select channels on your TV set, but only frequencies, you can
look this up in the enclosed table in the back of this manual. This set channel now shows
the connected A/V device and from now on you can watch this on the channel you
selected.
6. Now check if there is no interference on the TV-channels close by. If there is, you need to
find two (or if possible three) other free channels and set the modulator to that one.
If you have multiple TV sets in your home (connected to the same antenna network), then
you can watch this signal on the other TV sets as well. However first you need to set the right
channel on every TV.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek Megaview70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek Megaview70 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info