613347

Marmitek Megaview70 Manual

9
Zoom out
Zoom in
Previous page
1/68
Next page
ENGLISH
9Megaview70™
7. SETTING THE INFRARED RETURN CHANNEL
FOR USING REMOTE CONTROL
An infrared receiver is supplied with this set. This receiver can be placed between the TV and
the antenna signal. The receiver receives the infrared signal from your remote control and
sends this signal through the antenna cable back to the MegaView70 modulator.
With the supplied IR extension cable you can change this back into an infrared signal and pass
it to the device connected. This way you can operate this device (for instance a DVD-player)
from another room.
Connecting the infrared return channel is easiest if you do this together with another
person.
TV1
1. Connect the supplied IR extension cable to the side of the modulator (6). The IR LED has
a self adhesive backside. Remove the protection sheet and carefully stick the IR LED on
the IR sensor of your A/V device. This IR sensor can be recognized from the dark colored
synthetic window.
TV2
2. Disconnect the antenna cable, which can be found at the back of your TV. Connect this
to the ‘In’-connector of the IR receiver (metal housing) (7).
3. Connect the ‘To TV’-side to your TV (8). If necessary you can use the supplied adapters
(F-connector to IEC).
4. Place the black housing of the IR receiver (with the infrared receiver in it) so that it is in
sight of your remote control when you are using this (9). Avoid direct sunlight or light from
a plasma- or LCD-screen.
5. Connect one of the supplied power adapters to the IR receiver (metal housing).
6. Now point your remote control at the IR receiver and press a button to change the channel
or function. The device connected should now respond. If not, move the IR receiver a bit
and try again. The position of the IR LEDs can be pretty precise.
7. As soon as this functions properly you can stick the IR LED firmly to the device. This will
not damage your device.
You can switch the MegaView70 modulator on and off (to save power) by pressing the switch
on the IR receiver for a few seconds. No image will be visible at the channel you chose and
the LED display will show “- -”. To switch the modulator on again you have to repeat this
action.
Tips:
When you want to operate your devices from multiple TVs, you can purchase extra infrared
receivers (chapter 8).
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek Megaview70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek Megaview70 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info