Manual Marmitek Megaview70 (page 5 of 68) (English, German, Dutch, French, Italian, Spanish)

613347

Zoom out

Zoom in

1/68

ENGLISH

5Megaview70™

3. CONNECTING THE DEVICE TO

THE MEGAVIEW70 MODULATOR

Switch off all devices before you start connecting. Then connect the device you want to

connect (for instance the DVD-player or AV-camera) to the MegaView70. You can connect

the device with a SCART cable or a cinch cable. Use one of the two possibilities mentioned

below.

Connecting an A/V appliance via SCART (1)

You can use the ‘SCART connection’ on the modulator to add the video- and audio signal

desired to the antenna signal. You can use a SCART cable (not included) and you connect this

to the ‘A/V IN’ of the MegaView70.

Tip: See chapter 8 Extra options for the possibility to connect multiple devices

Connecting an A/V appliance via cinch cable and scart adapter(1)

Any so called composite video- and audio signal can be connected to the modulator. For

this you can use the cinch cable and scart adapter (included). Make sure the colours of the

plugs and the sockets are corresponding. That means red to red, white to white and yellow

to yellow.

A/V appliance via SCART to TV (2)

The ‘A/V OUT’ connection on your MegaView70 offers you the possibility to connect not only

the signal of your A/V devices to the antenna signal, but to also loop it to a TV set via SCART

(for watching devices via the SCART-input instead of via the TV tuner).

Attention: This connection only transfers the A/V signal of the connected device back to the

TV set and not the other TV channels.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek Megaview70 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marmitek Megaview70 Manual

Product: