Manual Marmitek GigaView 821 (page 7 of 44) (English, German, Dutch, French, Italian, Spanish)

494238

Zoom out

Zoom in

1/44

4.2 Using the Remote Control

4.3 LOOP-LINK FUNCTION

Activate/deactivate the loop-link function on the GV821 transmitter.

• Activate:

If the GV821 transmitter and receiver are both on, press the Power button once on the

receiver. The receiver will go to Stand-by mode and the transmitter will go to loop-link

function. The HDTV or projector connected to the receiver will then show the following

symbol for 3 seconds.

• Deactivate:

If the GV821 transmitter and receiver are both on, press once on the Power button on the

transmitter. Both the transmitter and receiver will go to Stand-by mode and the loop-link

function on the transmitter will switch off. The HDTV or projector connected to the receiver

will then show the following symbol for 3 seconds.

5. FREQUENTLY ASKED QUESTIONS

No connection

If the GigaView 821 cannot make a stable connection for 80 seconds during start-up, the

GV821 receiver is probably outside the range of the GV821 transmitter. Place them closer

together (a minimum distance of 2 metres apart) and check whether the connection can be

made.

7GIGAVIEW 821

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek GigaView 821 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marmitek GigaView 821 Manual

Product: