494238
8
Zoom out
Zoom in
Previous page
1/44
Next page
No input signal available from chosen source
The GV821 does not recognise an input signal on the selected SOURCE.
Check whether the correct HDMI source has been selected and whether this is ON.
Check whether the HDMI cable between the GV821 transmitter and HD device is connect-
ed properly.
Replace the HDMI cable to the HD device.
Video resolution is not supported
The video resolution that is set on your HD device is not recognised by the GV821 transmitter.
Connect the HD device directly to the HDTV or projector and check whether the set video
resolution corresponds to the resolutions that are supported (page 40).
Do you have other questions that have not been resolved by the above information? Please
go to www.marmitek.com
6. TECHNICAL DATA
Resolutions
Supported HDTV resolution (HDMI) 480p, 576p, 720p, 1080i, 1080p
Supported PC Resolution (max.) 1600 x 1200
Supported 3D formats 1080p@23.98/24 Hz, 720p@59.94/60/50 Hz
Supported audio formats (digital) up to 6 Mbps AC-3 and DTS
Supported standards HDCP 2.0, EDID/ E-DCC1.1, CEC
Wireless
Operating frequency 5.1 ~ 5.6 GHz
Operating range
Up to 25 meter LOS (line of sight), up to 12 meter non LOS
System Latency No latency (<1ms)
Transmitter
HDMI input 2x HDMI (19-pin female)
HDMI output 1x HDMI (19-pin female), built-in HDMI splitter
IR extender LED 2.5mm jack
Dimensions 192 x 97 x 32mm
Receiver
HDMI output 1x HDMI (19-pin female)
Dimensions 95 x 95 x 32mm
Infrared
Supported IR frequency 36kHz ~ 56kHz
Power supply
Switch mode Power adaptor 100-240VAC @ 50-60Hz, 5VDC 3A
Specifications may be modified without prior notice.
Environmental Information for Customers in the European Union
European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must
not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately
from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment
via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent
potential negative consequences to the environment and human health. For more detailed information about the disposal of your old
equipment, please contact your local authorities, waste disposal service, or the shop where you
purchased the product.
8 MARMITEK
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek GigaView 821 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek GigaView 821 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info