122674

Marmitek easytouch 35 Manual

20
Zoom out
Zoom in
Previous page
1/80
Next page
20 MARMITEK
• Operate your audio/video equipment that is hidden in the wardrobe; The RF
signal travels through walls, ceilings and cupboard
doors.
Simply connect the receiver to a wall socket within sight of your equipment: it could not
be easier.
Article numbers 09665 (E), for use in European countries except England, 09673 (U), for
use in England
Ask your dealer about the possibilities or go to our web site www.marmitek.com for
more information about Marmitek X-10 Home Control and all the available modules.
13 Extra functions:
1. Keypress Acknowledge Beep Feature:
It is possible to get an audible feedback of key-presses. When any key is pressed, the
remote will generate a beep acknowledging the keypress. The Keypress Acknowledge
feature can be toggled on or off as follows:
1. Activate your ET35 remote by touching the screen.
2.
Press and hold Setup key until the LED remains on (this occurs after approximately 2-3
seconds) and the Main Setup Screen is shown.
3. Release Setup key.
4. To disable the beep, press and hold the rubber Stop key until the LED blinks. To
enable the Beep, press and hold the rubber Play key until the LED blinks.
5. Beep Feature now toggled On or Off and the Main Setup Screen is shown.
2. Touchscreen Panel On-Time:
The Touchscreen Panel display will remain on for a User selectable time period (10, 20,
30,...90 seconds). Power-on default is 10 seconds from last keypress. To set the
Touchscreen/Light On time:
1. Press the TV key
2. Press and hold Setup key until the LED remains on (this occurs after approximately 2-3
seconds) and the Main Setup Screen is shown.
3. Release Setup key.
4. Press and release the Setup key. The LED will blink to acknowledge the keypress and
the "9" Digit Setup Screen will be shown.
5. Press and release a digit key 1-9 (1=10 seconds, 2=20seconds, etc) followed by
ENTER. The display will return to the Main Setup Screen.
6. Touchscreen On time setting now complete.
7. Press the Touchscreen "EXIT" key to return to normal status.
20055_20061108_UG_EasyTouch_35_touchscreen_remote 09-11-2006 10:22 Pagina 20
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek easytouch 35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek easytouch 35 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info