122674

Marmitek easytouch 35 Manual

19
Zoom out
Zoom in
Previous page
1/80
Next page
19EASYTOUCH 35
6. Display will show the Code Setup Screen. Enter 821.
7. Press and release the Touchscreen "EXIT" key to return to normal operation.
To program the key to send radio signals, proceed as follow
1. Activate your ET35 remote by touching the screen
2. Press and hold the Setup key until the LED remains on (this occurs after approximately
2-3 seconds) and display shows the Main Setup Screen.
3. Release Setup key.
4. Press and release the Touchscreen "CODE" Key.
5. Display will show the Mode Setup Screen. Press and release Marmitek X-10 Home
Control key .
6. Display will show the Code Setup Screen. Enter 820.
7. Press and release the Touchscreen "EXIT" key to return to normal operation.
Marmitek Home Control Modules
If you want to control your lights and appliances you will also need,
besides the EasyTouch 35, a Marmitek X-10 Home Control Module.
This can be plugged into any electrical socket. No hassle with extra
cables: extra wiring is not necessary because the connected device is
operated via your EasyTouch 35 remote (with RF signals). Use the
Marmitek Home Control TM13 module (available separately) and
connect your table lamp or other electrical appliance. Switch on/off:
control everything with the EasyTouch 35. The Home Control TM13 module converts the
RF signals of the EasyTouch 35 into an X-10 signal that is then transferred via the mains.
All the other X-10 modules that are connected to your mains, are also operated through
the EasyTouch 35 module. Read more about this subject on the Marmitek web site
www.marmitek.com
Article numbers: 09666 (G), for use in The Netherlands and Germany, 09674 (F) for use in
Belgium and France, 09675 (U) for use in England
Control Anywhere
The Control Anywhere module (available separately) gives you the possibility to control all
your audio and video equipment with the EasyTouch 35 anywhere in your home. The
EasyTouch 35 transmits an RF signal to the Control Anywhere mod-
ule, which then transforms this signal into an IR signal, which is sent
to your device.
Here are some examples of the uses of Control Anywhere:
• Operate the DVD and satellite receiver from the bedroom,
without having to lay any extra cables.
• Turn up the volume of the radio in the living room while
you are in the kitchen.
ENGLISH
HomeControl
TM13
Control
Anywhere
20055_20061108_UG_EasyTouch_35_touchscreen_remote 09-11-2006 10:22 Pagina 19
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek easytouch 35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek easytouch 35 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info