494283
16
Zoom out
Zoom in
Previous page
1/100
Next page
16
© MARMITEK
Range is reducing
There are too many interfering sources (e.g. metal constructions) between the handset and
the door unit. Place the handset at a different place for a stronger signal.
The batteries are low. Replace the door unit batteries or charge the handset.
Out of reach indicator is always on
The door unit is not getting powered. Replace the batteries or check the power adapter of
the door unit.
The back door on/off select dipswitch (21) is set on the ‘ON’ position. Set the dipswitch on
‘OFF’.
Electric door opener is not functioning
The Door open on/off select dipswitch (20) is set on the ‘OFF’ position. Set the dipswitch on
‘ON’.
You haven’t used a power adapter for the door unit. Connect the power adapter.
The connecting clamps are incorrectly connected. Connect them correctly.
The electric door opener sometimes functions and sometimes not.
When you operate the electric door opener, in the display next to the battery indicator you
will see the symbol of a closed door. Please do not hang up until you see that this symbol
has changed into an open door.
Intercom is not functioning
The ID code is not cloned correctly to the other handsets. Repeat the cloning procedure.
The battery is (almost) empty. Charge the battery of the handset.
The different handsets are set to different channels. Set the handsets on the same channel
and repeat the cloning procedure.
Do you still have questions, please check out www.marmitek.com
10. TECHNICAL DATA
Handset
Power: 4,8v Ni-mH battery set
Charger: 9V 300mA
Power consumption: Stand-by 25 mA
Active 50 mA
Bell sound: 3 Programmable tunes
Channels: 1,2,3,4.
Dimensions: 52x142x32mm
Door unit
Range Up to 150m in free field,
up to 50m through walls and ceilings
Power Battery (4x AA alkaline)
20194_20100216_UG_Doorphone120.i16 16 12-3-2010 9:52:47
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek DoorPhone 124 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek DoorPhone 124 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 7,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info