Manual Marmitek DoorPhone 124 (page 14 of 100) (English, German, Dutch, French, Italian, Spanish)

494283

Zoom out

Zoom in

1/100

• As soon as the handset is answered, the door unit doorbell indicator light (2) shall

burn constantly. The caller can communicate by speaking into the microphone (3).

To prevent echo, there is a hands-free function built in, which makes sure that when a

visitor speaks into the microphone (3) of the door unit, the loudspeaker (4) shuts off.

Beware! This means when the visitor is speaking into the microphone, he will not be able

to hear you, therefore wait with answering until the visitor has finished speaking.

• When receiving a call from the door unit, the symbol

shall appear on the display. You

can answer the call by pressing on the speech button (9). At the same time the symbol

will appear on the display. From this moment on, it is possible to speak to the visitor.

• Beware! The system has a built-in conversation time limit of 60 seconds, which is for if you

forget to break the connection after a conversation has ended. When you are reaching this

time limit, you shall hear a signal tone. If required, you can extend the conversation time by

another 60 seconds by pressing on the speech button (9). There is no limit to the amount

of times you can extend the conversation.

•

In case you have also connected an electric door opener, you can open the door during the

conversation by briefly pressing on the door-open button (11). After approximately 4-5 seconds,

the symbol

will appear on the LCD screen. This function can be switched on or off with the

use of the Door open on/off dipswitch (20) on the handset. Furthermore, the door can only be

opened when there is a connection between the handset and the door unit.

7. SPECIAL FUNCTIONS

• Ringtones; use the button (14) to choose the desired ringtone.

• Ring mode; use the button (15) to select the ring mode. Depending on your selection,

symbols (F till L) will appear on the screen. Note; in case you select a combined function,

the battery will need to be charged more often, at the cost of the battery’s lifespan.

• Loudspeaker volume; using the buttons (12-13), you can adjust the loudspeaker volume

of the receiver (16) during a conversation.

• Extra door unit; this function is not active. Make sure that the yellow backdoor on/off

select dipswitch (21) is on the ‘OFF’ position. A wrong setting can result in a false notice

‘Out of range’.

• Not home; when you have not answered a call from the door unit, the symbol

will

appear on the LCD screen. This symbol will alert you of the fact that someone has been at

the door. Pressing on the on/off button (8) will make the symbol disappear.

• Out of range; when your handset is beyond the reach of the door unit, you will hear a

signal and the symbol

will appear on the display. Beware; this notice will not be activated

as soon as you are out of range but rather when you are out of range for over 30 minutes.

Pressing the on/off button (8) will stop the alarm temporarily, but the symbol

will remain

displayed. As soon as you are within reach of the door unit, the alarm will stop and the

symbol will disappear.

This signal will also appear when the batteries of the door unit are low, and if the external

power supply fails or if the switch for the extra door unit is on the ‘ON’ position while there

is no extra unit installed.

20194_20100216_UG_Doorphone120.i14 14 12-3-2010 9:52:47

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek DoorPhone 124 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 7,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marmitek DoorPhone 124 Manual

Product: