494283

Marmitek DoorPhone 124 Manual

15
Zoom out
Zoom in
Previous page
1/100
Next page
15
DOORPHONE 120™
• Battery life; in case of power cut, the batteries of the door unit should last approximately
5-6 weeks. This depends on the use of the system. When the batteries are low, the symbol
shall appear on the display and a signal will be heard. Pressing the on/off button (8) will
stop the signal temporarily, but the symbol
will remain displayed.
• Outside temperature; The outside temperature is displayed on the handset. During the
installation of the door unit, the temperature will not be displayed on the handset, but after
the installation is done, the temperature will appear.
8. INTERCOM
This function applies only with the use of 2 or more handsets. In that case it is necessary that
all handsets are set to the same channel and have the same ID code (see ‘Cloning’).
Calling handset Receiving handset(s)
Press on the ‘Call’ button (10) and you will hear the
ringtone, also the symbol
will appear.
When receiving the call, the ringtone will be heard.
Ringtone stops when the call in answered, you may speak
now. If no one answers, the ringtone will stop after 20
seconds.
Press on the speech button (9) to answer the call. The
ringtone will stop and the symbol
will appear, you can
now start to converse. You can also choose to press the
on/off button (8) to ignore the call.
The conversation time is limited to 30 seconds, when
reaching the end of this limit you will hear a beep. You can
extend this time limit by another 30 seconds by pressing
the speech button (9). There is no limit to the amount of
times you can extend the time limit.
Conversation period cannot be extended with the receiving
handset.
End the conversation by pressing on the on/off button (8). End the conversation by pressing on the on/off button (8).
Calling selectively with a handset is not possible. When a handset makes a call, all other
handsets (that are set to the same channel) will ring and can answer the call. The first handset
that answers the call by pressing the speech button (9) will block all other handsets, and these
will not be able to receive the call.
Beware! When two handsets are in conversation, it will not be possible to receive a call from
the door unit.
9. FREQUENTLY ASKED QUESTIONS
Handset and door unit are not communicating
• The ID code is not set correctly. Repeat the pairing procedure.
• The channels are not synchronised. Set the handset and the door unit on the same channel
and then repeat the pairing procedure.
• The batteries are low. Replace the door unit batteries or charge the handset.
• The yellow log-on dipswitch (7) on the door unit is still on ‘Pairing’. Repeat the pairing
procedure and set the switch to the normal position.
20194_20100216_UG_Doorphone120.i15 15 12-3-2010 9:52:47
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek DoorPhone 124 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek DoorPhone 124 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 7,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info