English Page 36
G. Display functions and programming possibilities
2. Programming 'automatic cut-out OPEN'
Attention!
The automatic cut-out is set automatically.
Only change it if necessary (error No. 10)
When increasing the set value the max. force in OPEN direc-
tion is increased and thus the sensitivity of the automatic
cut-out is reduced.
Attention!
Always test the max. allowed operating forces according to
EN 12445 and EN 12453!
Advice:
The setting of the automatic cut-out corresponds to the
maximum power of the operator. At the first travel to
OPEN or CLOSE direction after 'POWER ON' the automatic
cut-out is effective according to the adjustment. For further travels the
self-learned power, that is more sensitive, is effective. The automatic
cut-out is still the upper limit of power.
