742762
21
Zoom out
Zoom in
Previous page
1/40
Next page
8. Initial operation
Caution!
The automatic cut-out must be correctly
programmed for the CLOSE and OPEN
directions to prevent damage to persons or
property.
The operator system determines the maximum required driving
power during the first two runs after setting the end positions of
the door.
Operate the operator system (with the door coupled) to drive
the door once from the CLOSED position to the OPEN position
and back to the CLOSED position without interruption.
During this learning run, the operator system determines the
maximum push and pull forces and the reserve power required to
move the door.
1.
After pressing the (+) button:
The door must open and travel to the saved
OPEN end position.
2.
After pressing the (–) button:
The door must close and travel to the saved
CLOSED end position.
3.
After pressing the hand transmitter button:
The operator system must move the door in
either the OPEN or CLOSE direction.
4.
After pressing the hand transmitter button
while the operator system is running:
The operator system must stop.
5.
When the button is pressed again,
the operator system moves in the opposite
direction.
8.6.2 Checking the automatic cut-out
Check:
After express programming and after
making changes to the programming menu,
the following learning runs and checks must
be carried out.
Automatic cut-out, OPENING
For drive systems where the door has openings in the door wing
(diameter of opening > 50 mm):
Apply a load of 20 kg to the middle of the lower edge of the
door whilst the door is running.
The door must stop immediately.
Automatic cut-out, CLOSING
Place a 50 mm high obstacle on the ground.
Drive the door towards the obstacle.
The drive system must stop and reverse when it comes into
contact with the obstacle.
8.6 Function test
8.6.1 Learning run for determining
the driving power
Advice:
The parameter settings are still saved if the
power supply is disconnected.
Only a reset causes the driving power settings
for the OPEN and CLOSE directions to revert to
the factory settings.
Test:
Installation and Operating Instructions, Comfort 257.2 GB (#99737) 21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 257.2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 257.2 in the language / languages: English as an attachment in your email.

The manual is 4,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 257.2

Marantec Comfort 257.2 User Manual - German - 40 pages

Marantec Comfort 257.2 User Manual - German - 40 pages

Marantec Comfort 257.2 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info