742762
23
Zoom out
Zoom in
Previous page
1/40
Next page
9. Extended operator functions
9.2 General overview of the programmable functions
Level Menu Factory default setting
Level 1 – Basic functions
Menu 3: Intermediate position OPEN
Menu 4: Intermediate position CLOSE
Menu 7: Relay output extension Signal light
Menu 8: RESET No reset
Level 2 – Operator settings
Menu 1: Required driving power OPEN Setting 8
Menu 2: Required driving power CLOSE Setting 8
Menu 3: Automatic cut-out OPEN Setting 8
Menu 4: Automatic cut-out CLOSE Setting 8
Level 3 – Automatic closing timer
Menu 1: Automatic closing timer Deactivated
Menu 3: Door open duration 2 Seconds
Menu 4: Warning time 1 Seconds
Menu 5: Start-up warning 0 Seconds
Menu 7: Signal light
Door movement /
Warning: flashing
Door stoppage: off
Menü 8: Relay output 2 lane control Reporting faults
Level 4 – Remote programming
Menu 2: Intermediate position OPEN
Menu 3: Intermediate position CLOSE
Menu 4: OPEN
Menu 5: CLOSE
Menu 6: Entry request
Menu 7: Exit request
Menu 8: EWM relay output (Level 1, Menu 6, L 6)
Level 5 – Special function Menu 1: Programmable impulse input Impulse
Menu 4: Lighting duration 180 Seconds
Level 6 - Variable speed
Menu 1: Speed OPEN Setting 16
Menu 2: Soft run speed OPEN Setting 7
Menu 3: Soft run position OPEN
Menu 4: Speed CLOSE Setting 16
Menu 5: Smart run speed CLOSE Setting 10
Menu 6: Soft run speed CLOSE Setting 7
Menu 7: Smart run position CLOSE
Menu 8: Soft run position CLOSE
Level 7 - Servicing and maintenance
Menu 1: Door cycle counter
Menu 2: Maintenance counter
Menu 3: Set the maintenance interval OFF
Menu 8: Reset servicing and maintenance No reset
Level 8 – System settings
Menu 1: Photocell Operation without photocell
Menu 2: Closing edge safety device Door reverses a little
(OPEN/CLOSE)
Menu 3: Automatic cut-out Door stops (OPEN)
Door reverses a little (CLOSE)
Menu 4: Operating modes Press-and-release (OPEN/CLOSE)
Menu 5: Function of the direction command transmitters Not active
Menu 6: Function of the impulse command transmitters STOP only, then standard
sequence
Installation and Operating Instructions, Comfort 257.2 GB (#99737) 23
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 257.2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 257.2 in the language / languages: English as an attachment in your email.

The manual is 4,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 257.2

Marantec Comfort 257.2 User Manual - German - 40 pages

Marantec Comfort 257.2 User Manual - German - 40 pages

Marantec Comfort 257.2 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info