742762
19
Zoom out
Zoom in
Previous page
1/40
Next page
8.5 Express programming
8.5.1 General notes on express programming
The controls are programmed using the OPEN (+), CLOSE (-) and
STOP (P) buttons.
If no buttons are pressed within 120 seconds while in
programming mode, the controls revert to operating mode.
A corresponding message is displayed.
Reference:
The messages are explained in Section 10.
i
8.5.2 Programming buttons
Advice:
- The carriage stop must be fitted before
carrying out express programming.
- For proper initial operation of the operator
system, the express programming procedure
must be carried out. This applies for initial
operation and after a reset.
Turn the key to the “0” position.
Press the STOP button and keep it pressed.
Switch the key from position “0” to position “1” within 4
seconds and then release the STOP button.
The complete express programming is shown in the following
operation plan.
Advice:
The operator system is already in express
programming mode when set in operation for
the first time.
Starting the express programming
The basic functions of the operator system are set during the
express programming procedure.
- Door OPEN position
- Door CLOSED position
- Remote control
The programming procedure is a consecutive process. It is
essential that this procedure be carried out.
Preconditions
The following conditions must be assured before express
programming can commence:
- The door must be in the CLOSED end position.
- The carriage must be connected up.
- The DIP switch is set to ON.
Advice:
When programming the OPEN and CLOSED
door positions, the reference point must be
passed. Advice:
The express programming can be exited at any
time by pressing the P button 3 times.
8. Initial operation
Installation and Operating Instructions, Comfort 257.2 GB (#99737) 19
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 257.2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 257.2 in the language / languages: English as an attachment in your email.

The manual is 4,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 257.2

Marantec Comfort 257.2 User Manual - German - 40 pages

Marantec Comfort 257.2 User Manual - German - 40 pages

Marantec Comfort 257.2 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info