742661

Marantec Comfort 150DC Manual

4
Zoom out
Zoom in
Previous page
1/32
Next page
EnglishDeutsch Page 61
Test Instructions - Error numbers -
The error number is displayed on briefly pressing programming button P.
O
28
Putting into operation
Power-operated windows, doors and gates for industrial or commercial use must be
checked by a specialist after initial installation and then regularly at intervals of 1 year minimum.
Maintenance instructions
The Comfort 150DC/ 160DC garage door operator is virtually maintenance-free.
However, all movable parts of the door and operator system should be checked regularly
and kept in an easily movable condition. The door must be easy to operate manually.
The separate door counterbalance mechanism must be checked regularly.
The "OPEN" and "CLOSE" settings of the automatic cut-out should be checked regularly.
O
27
Fault Indicator flashes erraticallyError number
Photocell actuated Indicator 66
Programming aborted Indicator 77
Reference point switch defective Indicator 88
Defective RPM sensor
Anti-lock system actuated
Indicator 8 + 19
Power limit Indicator 8 + 210
Excess travel stop Indicator 8 + 311
Photocell self-monitoring unit not o.k. Indicator 8 + 715
Power limit self-monitoring unit Indicator 8 + 7 + 116
Learned power limit Indicator 8 + 7 + 6 + 5 + 228
Response sensitivity of power limit Indicator 8 + 7 + 6 + 5 + 127
Static current circuit broken Indicator 1 - 836
Seite 4
• Gleitbahnen des Führungsschlittens allseitig einfetten.
• Riegel (A) vorschieben, Schlitten in Führungsschiene schieben und Riegel (A) wieder
zurückziehen.
• Sicherungsstift (B) entfernen.
O
4
Gelenkteil (A) mit Führungsschiene verschrauben.
O
5
Um Einbaufehler und Schäden an Tor und Torantrieb zu vermeiden,
unbedingt nach den Montageanweisungen der Einbauanleitung
vorgehen. Einbauanleitung bitte aufbewahren.
Benötigtes Werkzeug
Gabel - Ringschlüssel SW 10
Gabel - Ringschlüssel SW 13
Steckschlüssel SW 10
Steckschlüssel SW 13
Schraubendreher Gr. 8
Schraubendreher Gr. 5
Kreuzschlitzschraubendreher Gr. 2
Kreuzschlitzschraubendreher Gr. 3
Steinbohrer ø 10 mm
Steinbohrer ø 6 mm
Metallbohrer ø 5 mm
Metallbohrer ø 7 mm
Zange
Metallsäge
Bohrmaschine
Hammer
Zollstock
Achtung:
Bei Bohrarbeiten den Antrieb mit Folie oder Pappe abdecken.
Bohrstaub und Späne können zu Funktionsstörungen führen.
O
2
• Führungsschiene in das Antriebsgehäuse einschieben.
• Beiliegende Zentrierschrauben (A) durch Führungsschiene in das Antriebsgehäuse eindrehen.
• 2 Klemmschrauben (B) festdrehen.
O
3
Führungsschiene und Antriebsgehäuse mit Zubehör der Verpackung entnehmen und zur
Montage bereithalten.
O
1
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 150DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 150DC in the language / languages: English, German as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 150DC

Marantec Comfort 150DC User Manual - Dutch, French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info