Manual Makita VC4210L (page 27 of 48) (English, German, Dutch, French)

711045

Zoom out

Zoom in

1/48

*) Optional accessories / Option depending on model

Original instruction

Makita VC4210L

CAUTION

If cooling air filter is clogged by dust the over-

load protection switch in the motor can be

activated.

1. In such case switch off the machine, clean cool-

ing air filter and allow machine to cool for ap-

prox. 5 minutes.

3.6 Wet pick-up

CAUTION

The machine is equipped with a water level

limit system which shuts off the machine when

the maximum liquid level is reached.

1. When this occurs, switch off the machine.

2. Disconnect the machine from the socket and

empty the container.

3. Never pick up liquids without the water level limit

system and filter in place.

4. Do not pick up flammable liquids.

5. Before liquids are picked up, always remove the

filter bag/wastebag and check that the water

level limit works properly.

6. If foam appears, stop work immediately and

emty the tank.

7. Clean the water level limiting device regularly

and check for signs of damage.

Before emptying the container, unplug the machine.

Disconnect the hose from the inlet by pulling out the

hose. Release the latches by pulling them outwards

so that the motor top is released. Lift up the motor

top from container. Always empty and clean the con-

tainer and water level limit system after picking-up

liquids.

Empty by tilting the container backwards or side-

ways and pour the liquids into a floor drain or similar.

Put back the motor top to the container. Secure the

motor top with the latches.

Heavy maneuvers can, by mistake, trigger the water

level limiting device. Should this happen; turn off the

machine and wait for 3 seconds to reset the device.

Continue to operate the machine afterwards.

3.7 Dry pick-up

CAUTION

Picking up environmentally hazardous materi-

als.

Materials picked up can present a hazard to the en-

vironment.

1. Dispose of the dirt in accordance with legal

regulations.

Remove the electrical plug from the socket before

emptying after dry pick-up. Release the latches by

pulling them outwards so that the motor top is re-

leased. Lift up the motor top from container.

Filter: Check the filters. To clean the filter you can

shake, brush or wash it. Wait until the filter is dry

before re-starting dust pick-up.

Dust bag: check bag to ensure the fill factor. Re-

place dust bag if necessary. Remove the old bag.

The new bag is fitted by passing the cardboard piece

with the rubber membrane through the vacuum inlet.

Make sure that the rubber membrane is passing past

the heightening at the vacuum inlet.

After emptying: close motor top to the container

and secure the motor top with the latches. Never

pick up dry material without filter fitted in the ma-

chine. The suction efficiency of the machine depends

on the size and quality of the filter and dust bag.

Therefore – use only Original filter and dust bags.

4 After using the machine

4.1 After use

Remove the plug from the socket when machine is

not in use. Wind up the cord starting from the ma-

chine. The power cord can be wound up around the

motor top or at the container or placed in the includ-

ed hook, or fastening means. Some variants have

special storage places for accessories.

4.2 Transport

1. Before transporting the machine, close all the

latches.

2. Do not tilt the machine if there are liquids in the

dirt tank.

3. Do not use a crane hook to lift the machine.

4. Do not lift the machine by the trolley handle

the handle of the MAKPAC-Box

4.3 Storage

CAUTION

Store the appliance in a dry place, protected

from rain and frost. The machine shall be

stored indoors only.

4.4 Accessory and tool storage

For convenient transport and storage of accessories

or tools, integrated rails are found on side of machine

which allows fastening with straps or other means. A

flexible strap and hooks are included on back of ma-

chine for attachment of suction hose or mains cable.

For instruction see quick reference guide.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita VC4210L in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 46,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita VC4210L Manual

Product: