711045

Makita VC4210L Manual

25
Zoom out
Zoom in
Previous page
1/48
Next page
*) Optional accessories / Option depending on model
Original instruction
13
D
GB
F
NL
Makita VC4210L
2 Risks
2.1 Electrical components
DANGER
The upper section of the machine con-
tains live components.
Contact with live components leads to seri-
ous or even fatal injuries.
1. Never spray water on to the upper sec-
tion of the machine.
DANGER
Electric shock due to faulty mains con-
necting lead.
Touching a faulty mains connecting lead
can result in serious or even fatal injuries.
1. Do not damage the mains power lead
(e.g. by driving over it, pulling or crush-
ing it).
2. Regularly check whether the power cord
is damaged or shows signs of ageing.
3. If the electric cable is damaged, it must
be replaced by an authorized Makita
distributor or similar qualified person in
order to avoid a hazard.
4. In no circumstances should the power
supply cord be wrapped around fingers
or any part of the operators person.
2.2 Hazardous dust
WARNING
Hazardous materials.
Vacuuming up hazardous materials
can lead to serious or even fatal injuries.
1. The following materials must not be
picked up by the machine:
– hot materials (burning cigarettes, hot
ash, etc.)
– flammable, explosive, aggressive
liquids (e.g. petrol, solvents, acids,
alkalis, etc.)
– flammable, explosive dust (e.g. mag-
nesium or aluminium dust, etc.)
2.3 Spare parts and accessories
CAUTION
Spare parts and accessories.
The use of non-genuine spare parts, brushes
and accessories can impair the safety and or func-
tion of the appliance.
1. Only use original spare parts and accessories
from Makita. Spare parts that can affect health
and safety of the operator and or function of the
appliance, are specified below:
Description Order No.
Flat filter PTFE, 1 pcs. W107418351
Fleece filter bag, 5 pcs. W107418353
Disposal bag, 5 pcs. W107418355
Motor cooling air filter PET, 1 pcs. W107418352
2.4 In explosive or inflammable atmosphere
CAUTION
This machine is not suitable for use in explo-
sive or inflammable atmospheres or where
such atmospheres are likely to be produced by the
presence of volatile liquid or inflammable gas or va-
pour.
3 Control / Operation
CAUTION
Damage due to unsuitable mains voltage.
The appliance can be damaged as a result of
being connected to an unsuitable mains voltage.
1. Ensure that the voltage shown on the rating plate
corresponds to the voltage of the local mains
power supply.
3.1 Starting and operating of the machine
1. Check that the electrical switch is switched off
(in position 0).
2. Check that suitable filters are installed in the
machine.
3. Connect the suction hose into the suction inlet at
the machine by pushing the hose forward until it
fits firmly in place at the inlet.
4. Connect the tubes with the hose handle, twist
the tubes in order to ensure that they are prop-
erly fitted.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita VC4210L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita VC4210L in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 46,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info