Manual Makita VC4210L (page 26 of 48) (English, German, Dutch, French)

711045

Zoom out

Zoom in

1/48

*) Optional accessories / Option depending on model

Original instruction

Makita VC4210L

5. Attach suitable nozzle to the tube. Choose noz-

zle depending on what type of material that is to

be picked-up.

6. If used for dust extraction in connection with

dust producing tool then connect end of suction

hose with appropriate adapter.

7. Connect the plug into a proper electrical outlet.

8. Put the electrical switch into position I in order to

start the motor.

Turn I:

Activate the machine

Turn

Stop the machine. Permanent power

on socket

Turn AUTO :

Activate Auto-On/Off operation

Turn I +

Activate the machine with

deactivated automatic filter cleaning

function

Turn AUTO +

Activate Auto- On/Off operation

with deactivated automatic filter

cleaning function

Suction power control operation on

separate turning knob

3.2 Auto-On/Off socket outlet for power tools

CAUTION

Appliance socket.

The appliance socket is designed for electrical

auxiliary equipment; see technical data for refer-

ence.

1. Prior to plugging in an appliance, always switch

off the machine and the appliance that is to be

connected.

2. Read the operating instructions to the appliance

to be connected and observe the safety notes

contained in these.

An appliance socket with earthing contact is inte-

grated in the machine. An external power tool can

be connected there. The socket features permanent

power on, when the electrical switch is in position

, i.e. the machine can be used as an extension

cord.

In position AUTO the machine can be switched on

and off by the power tool connected. Dirt is picked

up from the source of dust immediately. To comply

with regulations, only approved dust producing tools

should be connected.

The maximum power consumption of the connected

electrical appliance is stated in section “Specifica-

tions”.

Before turning the switch to position AUTO ensure

that the tool connected to the appliance socket is

switched off.

3.3 AutoClean

The machine is equipped with an automatic filter

cleaning system, AutoClean. A frequent cleaning cy-

cle will automatically run during operation to ensure

that suction performance is always at its best.

If suction performance decreases or in extensive

dust applications a manually filter cleaning operation

is recommended:

1. Switch off the machine.

2. Close the nozzles or suction hose opening with

the palm of your hand.

3. Turn the switch to position „I“ and let the ma-

chine operate at full speed for approx. 10 sec-

onds with the suction hose opening closed.

If suction power is still reduced take out the filter and

clean mechanically or replace filter.

For certain applications, like wet pick up, it is recom-

mended to turn off the automatic filter cleaning sys-

tem. For details see chapter 3.1.

3.4 Antistatic connection

CAUTION

The machine is equipped with an antistatic

system to discharge any static electricity that

may develop during dust pick-up.

The antistatic system is placed in front part of the

motor top and creates an earth ground connection to

the inlet fitting of the container.

For proper function the use of an electrical conduc-

tive or antistatic suction hose is recommended.

1. When inserting the optional disposal bag make

sure the antistatic connection is kept.

3.5 Cooling air filter

To protect the electronics and motor, the machine is

equipped with a cooling air diffusor. Clean the cool-

ing air diffusor regularly.

For areas with a high concentration of fine dust in

the surrounding air it is recommended to equip the

machine with an optional cooling air filter cartridge to

prevent dust from settling inside the air channels and

motor. Contact your local sales representative.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita VC4210L in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 46,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita VC4210L Manual

Product: