448594
11
Zoom out
Zoom in
Previous page
1/120
Next page
11
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
Model LS1017/LS1017L
Blade diameter 255 mm - 260 mm
Hole diameter
For all countries other than European countries 25.4 mm
For European countries 30 mm
Max. Cutting capacities (H x W) with 260 mm in diameter
No load speed (min
-1
) 4,200
Laser Type (LS1017L only) Red Laser 650 nm, <1 mW (Laser Class 2)
Dimensions (L x W x H) 825 mm x 536 mm x 581 mm
Net weight For all countries other than European countries............19.4 kg
For European countries............19.5 kg
Safety class /II
Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
Specifications may differ from country to country.
Weight according to EPTA-Procedure 01/2003
1. Stopper pin
2. Bolts
3. Blade guard
4. Kerf board
5. Screw
6. Saw blade
7. Blade teeth
8. Left bevel cut
9. Straight cut
10. Adjusting bolt
11. Turn base
12. Top surface of turn base
13. Periphery of blade
14. Guide fence
15. Stopper arm
16. Adjusting screw
17. Miter scale
18. Pointer
19. Lock lever
20. Grip
21. Lever
22. Arm
23. Bevel scale
24. Release button
25. Locking screw
26. Lock-off button
27. Switch trigger
28. Hole for padlock
29. Switch for laser
30. Screw holding the laser unit box
31. Dry cell
32. Socket wrench with hex wrench
on its other end
33. Wrench holder
34. Socket wrench
35. Blade case
36. Center cover
37. Hex bolt
38. Arrow
39. Shaft lock
40. Hex bolt (left-handed)
41. Outer flange
42. Ring
43. Inner flange
44. Spindle
45. Dust nozzle
46. Dust bag
47. Fastener
48. Support
49. Sliding fence
50. Clamping screw
51. Vise arm
52. Vise knob
53. Vise rod
54. Vise plate
55. Vise nut
56. Holder
57. Lock screw
58. 52/38° type crown molding
59. 45° type crown molding
60. 45° type cove molding
61. Inside corner
62. Outside corner
63. Vise
64. Spacer block
65. Aluminum extrusion
66. Horizontal vise (optional
accessory)
67. Holes
68. Cut grooves with blade
69. Hex bolts
70. Triangular rule
71. 0° adjusting bolt
72. Left 45° bevel angle adjusting bolt
73. Right 5° bevel angle adjusting bolt
74. Screwdriver
75. Brush holder cap
Miter angle
Bevel angle
45° (left)
50 mm x 310 mm 91 mm x 310 mm
45° 50 mm x 220 mm 91 mm x 220 mm
60° (right) - 91 mm x 153 mm
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita LS 1017L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita LS 1017L in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info