Manual Makita HTR 5600 (page 10 of 86) (English, German, Dutch, French, Italian, Spanish)

78549

Zoom out

Zoom in

1/86

STARTING THE MACHINE

Move at least 3 meters away from the place of refuelling. Place the

Hedge Trimmer on a clean area of ground make sure that the cutting

tool does not come into contact with the ground or any other objects.

Cold starting (When the engine is cold or it has been stopped for

more than 5 minutes or when fuel is added to the engine.

1. Push the I-O Switch (1) to “I” position.

2. Give a gentle push on the primer pump (2) repeatedly (7 to 10

times) until fuel comes into the primer pump.

3. Move the choke lever (3) to position “START”.

4. Hold the unit down firmly so you will not lose control while

cranking the engine. If not held down properly, the engine could

pull you off balance or swing the cutting blade into an obstruction

or your body.

5. Pull the starter handle solely for 10 to 15 cm, and check the

location of pressure.

6. Pull strongly when pressurization can be felt and start the engine.

7. When the engine starts, return the choke lever to “Run”. Please

note that the choke lever will return to “Run” position

automatically when the throttle lever is operated and the

throttle is opened.

8. Run the engine for approximately one minute at a moderate

speed before aplying full speed.

Note: If the starter handle is pulled repeatedly when the choke

lever remains at “Start” position, the engine will not start

easily due to excessive fuel intake.

 In case of excessive fuel intake, remove the spark plug

and pull the starter handle slowly to remove excess fuel.

Also, dry the electrode section of the spark plug.

Hot staring:

(Restarting immediately after the engine has stopped)

When restaring a hot engine, first try the above procedure: 1, 4, 5, 6.

If the engine does not start, repeat above steps 1-8.

Note: Do not pull the starter rope to its full extent and do not

allow the starter grip to be retracted without control,

ensure that it is retracted slowly.

STOPPING THE MACHINE

1. Release the throttle lever completely.

2. Push the STOP Switch (on/off switch) to “O”

position, the engine rotation will become low

and the engine will stop.

(1)

HTR7610 HTR5600

(2)

(3)

HTR7610 HTR5600

RUN

START

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita HTR 5600 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita HTR 5600 Manual

Product: