78549
8
Zoom out
Zoom in
Previous page
1/86
Next page
8
FUELS/REFUELLING
Fuel and oil mirture
The engine of the hedge Trimmer is a high-efficiency two-stroke
engine.
It is run with a mixture of fuel and two-stroke engine oil. The engine
is designed for unleaded regular fuel with a min. -octane value of 91
ROZ.
In case no such fuel is available, you can use fuel with a higher
octane value. This will not damage the engine, but may cause poor
operating behaviour.
A similar situation will arise from the use of leaded fuel.
To obtain optimum engine operation and to protect your health and
the environment, only unleaded fuel should be used!
For lubricating the engine use a two-stroke engine oil (quality
grade:TSC-3), which is added to the fuel.
The engine has been designed for use with MAKITA two-stroke
engine oil and a mixture ratio of 50:1 only to protect the environment.
In addition, a long service life and a reliable operation with a
minumum emission of exhaust gases is guaranteed. It is absolutely
essential to observe a mixture ratio of 50:1 (MAKITA 2-stroke engine
oil), otherwise the reliable function of the Hedge Trimmer cannot be
guaranteed.
The correct mixture ratio:
Mix 50 parts gasoline with 1 part MAKITA 2-stroke engine oil (See
table on the right)
NOTE:
For preparing the fuel-oil mixture, first mix the entire oil
quantity with half of the fuel required. In an approved can
which meets of exceeds all local code standards, then add the
remaining fuel.
Thoroughly shake the mixture before filling it into the Hedge
Trimmers tank.
It is not wise to add more engine oil than specified to ensure
safe operation. It will only result in a higher production of
combustion residues which will pollute the environment and
clog the exhaust channel in the cylinder as well as the muffler.
In addition, the fuel consumption will rise and the performance
will decrease.
Handling petroleum products
Utmost care is required when handling fuel. Fuel may contain
substances similar to solvents. Refuel either in a well ventilated area or
outdoors. Do not inhale fuel vapors, avoid any contact of fuel or oil with
your skin.
If your skin comes in contact with these substances repeatedly and for
an extended period of time, it will desiccate.
Variouse skin diseases may result. In addition, allergic reactions are
known to occur.
Eyes can be irritated by contact with oil, fuel etc.
If oil, fuel, etc., comes into your eyes, immediately wash them with clear
water. If your eyes are still irritated, see a doctor immediately!
Observe the Safety Instructions on page 4
Gasoline 50:1
1,000cm
3
(1 liter)
20cm
3
5,000cm
3
(5liters) 100cm
3
10,000cm
3
(10liters) 200cm
3
+
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita HTR 5600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita HTR 5600 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info