690576

Makita EM2654LHC Manual

18
Zoom out
Zoom in
Previous page
1/84
Next page
18
MAINTENANCE
Adjustment of low-speed rotation (idling)
Whenitisnecessarytoadjustthelow-speedrotation(idling),performitbythe
carburetoradjustingscrew.
Checkup of low-speed rotation
CAUTION:
Thecuttingattachmentmaybespinningduringcarburetoradjustments.Wear
your protective equipment and observe all safety instructions. Be sure the
cutting attachment stops turning when the engine idles.
CAUTION:
When the unit is turned off, make sure the cutting attachment has stopped
before the unit is set down.
– Set the low-speed rotation to 3,000 min
-1
.
Ifitisnecessarytochangetherotationspeed,regulatetheadjustingscrew
(1) with Phillips screwdriver.
– Turntheadjustingscrewtotheright,andtheenginerotationwillincrease.
Turntheadjustingscrewtotheleft,andtheenginerotationwilldrop.
– Thecarburetor(2)isgenerallyadjustedbeforeshipment.Ifitisnecessaryto
readjustit,pleasecontactAuthorizedServiceAgent.
(1)
(2)
Throttle lever
To prevent the throttle lever (1) from being accidentally pulled, a lock-off lever
(2) is provided. To increase the engine speed, grasp the rear handle (the lock-
off lever is released by the grasp) and then pull the throttle lever.
To decrease the engine speed, release the throttle lever.
2
1
CAUTION: Before doing any work on the Petrol Brushcutter, always stop the engine and pull the plug cap off the spark plug (see “checking the
spark plug”).
Always wear protective gloves!
To ensure a long service life and to avoid any damage to the equipment, the following servicing operations should be performed at regular
intervals.
Daily checkup and maintenance
– Before operation, check the machine for loose screws or missing parts. Pay particular attention to the tightness of the cutter blade or nylon
cutting head.
– Beforeoperation,alwayscheckforcloggingofthecoolingairpassageandthecylinderns.
Clean them if necessary.
– Perform the following work daily after use:
• CleanthePetrolBrushcutterexternallyandinspectfordamage.
• Cleantheairlter.Whenworkingunderextremelydustyconditions,cleantheltertheseveraltimesaday.
• Checkthebladeorthenyloncuttingheadfordamageandmakesureitisrmlymounted.
• Checkthatthereissufcientdifferencebetweenidlingandengagementspeedtoensurethatthecuttingtoolisatastandstillwhilethe
engine is idling (if necessary reduce idling speed).
Ifunderidlingconditionsthetoolshouldstillcontinuetorun,consultyournearestAuthorizedServiceAgent.
– Check the functioning of the I-O switch, the lock-off lever, the control lever, and the look button.
Metal blade resharpening
CAUTION:
Themetalbladesmustonlyberesharpenedbyanauthorizedfacility.Manualresharpeningmayresultinimbalancesofthecuttingtoolcausing
vibrations and damage to the equipment.
NOTE: To increase the service life of the cutter blade it may be turned over once, until both cutting edges have become blunt.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita EM2654LHC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita EM2654LHC in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 17,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info