690919

Makita DUR187L Manual

16
Zoom out
Zoom in
Previous page
1/112
Next page
16 ENGLISH
2. Insertthehexwrenchthroughtheholeonthe
motor housing and rotate the spindle until the spindle is
locked.
3. Place the nylon cutting head onto the threaded
spindle directly and tighten it by turning it clockwise.
4. Removethehexwrench.
To remove the nylon cutting head, turn it counterclock-
wisewhileholdingthereceivewasherwiththehex
wrench.
Adjusting the handle/hanger
position
Adjustthehandleandhangerpositiontoobtainconfort-
able handling of the tool.
For DUR187U and DUR188U
Loosenthehexsocketheadboltsonthebottomofthe
handle holder. Move the handle to a comfortable work-
ing position and then tighten the bolts.
►Fig.26: 1. Handle holder 2.Hexsocketheadbolt
3. Handle
LoosentheHexsocketheadboltsonthehanger.Move
the hanger to a comfortable working position and then
tighten the bolts.
►Fig.27: 1.Hexsocketheadbolt2. Hanger
For DUR187L and DUR188L
Loosenthehexsocketheadboltsonthehandle.Move
the handle to a comfortable working position and then
tighten the bolts.
►Fig.28: 1.Hexsocketheadbolt2. Handle
Loosenthehexsocketheadboltonthehanger.Move
the hanger to a comfortable working position and then
tighten the bolt.
►Fig.29: 1.Hexsocketheadbolt2. Hanger
Hex wrench storage
CAUTION: Be careful not to leave the hex
wrench inserted in the tool head. It may cause
injuryand/ordamagetothetool.
Whennotinuse,storethehexwrenchasshowninthe
guretokeepitfrombeinglost.
►Fig.30: 1.Hexwrench
For DUR187L and DUR188L only
►Fig.31: 1. Handle 2.Hexwrench
OPERATION
Correct handling of tool
WARNING: Always position the tool on your
right-hand side. Correct positioning of the tool allows
formaximumcontrolandwillreducetheriskofseri-
ouspersonalinjurycausedbykickback.
WARNING: Be extremely careful to maintain
control of the tool at all times. Do not allow the
tool to be deected toward you or anyone in the
work vicinity. Failure to keep control of the tool
couldresultinseriousinjurytothebystanderandthe
operator.
WARNING: To avoid accident, leave more
than 15m (50 ft) distance between operators when
two or more operators work in one area. Also,
arrange a person to observe the distance between
operators. If someone or an animal enter the
working area, immediately stop the operation.
DUR187U and DUR188U
►Fig.32
DUR187L and DUR188L
►Fig.33
Attachment of shoulder harness
CAUTION: Always use the shoulder harness
attached. Before operation, adjust the shoulder
harness according to the user size to prevent
fatigue.
Connect the hook of the shoulder harness to the hanger
and put the shoulder harness on. Make sure that the
tool is held securely by the shoulder harness.
DUR187U and DUR188U
►Fig.34: 1. Hook 2. Hanger
DUR187L and DUR188L
►Fig.35: 1. Hook 2. Hanger
Detachment
The shoulder harness features a means of quick
release.
DUR187U and DUR188U
►Fig.36: 1.Strip
Pull out the strip release the tool from the shoulder
harness.
DUR187L and DUR188L
►Fig.37: 1. Buckle
Simplysqueezethesidesofthebuckletoreleasethe
tool from the shoulder harness.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita DUR187L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita DUR187L in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 21,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info