Manual Makita DUR187L (page 14 of 112) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

690919

Zoom out

Zoom in

1/112

14 ENGLISH

Indicating the remaining battery

capacity

Only for battery cartridges with the indicator

►Fig.6: 1. Indicator lamps 2. Check button

Press the check button on the battery cartridge to indi-

cate the remaining battery capacity. The indicator lamps

light up for few seconds.

Indicator lamps Remaining

capacity

Lighted Off Blinking

75% to 100%

50% to 75%

25% to 50%

0% to 25%

Charge the

battery.

The battery

may have

malfunctioned.

NOTE: Depending on the conditions of use and the

ambient temperature, the indication may differ slightly

from the actual capacity.

Power switch action

WARNING: Before installing the battery car-

tridge on the tool, always check to see that the

switch trigger actuates properly and returns to

the "OFF" position when released. Operating a tool

with a switch that does not actuate properly can lead

tolossofcontrolandseriouspersonalinjury.

CAUTION: Never put your nger on the

switch when carrying. The tool may start uninten-

tionallyandcauseinjury.

Press and hold the main power button for some sec-

onds to turn on the tool.

To turn off the tool, press and hold the main power

button again.

►Fig.7: 1. Main power button

To prevent the switch trigger from being accidentally

pulled, a lock-off lever is provided.

To start the tool, grasp the handle (the lock-off lever is

released by the grasp) and then pull the switch trigger.

To stop the tool, release the switch trigger.

DUR187U and DUR188U

►Fig.8: 1. Lock-off lever 2.Switchtrigger

DUR187L and DUR188L

►Fig.9: 1. Lock-off lever 2.Switchtrigger

NOTE: The tool is automatically turned off after the

tool is left one minute without any operations.

Speed adjusting

Youcanadjustthetoolspeedbytappingthemain

power button.

Eachtimeyoutapthemainpowerbutton,thelevelof

speed will change.

►Fig.10: 1. Main power button

Indicator Mode Rotation speed

Auto 4,000 - 6,000 min

-1

High 6,000 min

-1

Medium 5,000 min

-1

Low 4,000 min

-1

Reverse button for debris removal

WARNING: Switch off the tool and remove

the battery cartridge before you remove entan-

gled weeds or debris which the reverse rotation

function can not remove. Failure to switch off and

remove the battery cartridge may result in serious

personalinjuryfromaccidentalstart-up.

This tool has a reverse button to change the direction of

rotation. It is only for removing weeds and debris entan-

gled in the tool.

To reverse the rotation, tap the reverse button and pull

the trigger when the tool’s head is stopped. The power

lamp starts blinking, and the tool's head rotates in

reverse direction when you pull the switch trigger.

To return to regular rotation, release the trigger and wait

until the tool's head stops.

►Fig.11: 1. Reverse button

NOTE:

During the reverse rotation, the tool operates only

for a short period of time and then automatically stops.

NOTE: Once the tool is stopped, the rotation returns

to regular direction when you start the tool again.

NOTE: If you tap the reverse button while the tool's

head is still rotating, the tool comes to stop and to be

ready for reverse rotation.

Nylon cutting head

Optional accessory

NOTICE: The bump feed will not operate properly if

the head is not rotating.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DUR187L in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 21,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DUR187L Manual

Product: