793624

Makita DTR181 Manual

18
Zoom out
Zoom in
Previous page
1/132
Next page
18 ENGLISH
NOTICE: Be sure to mount the wire reel in the
 If it is mounted the
other way around, the wire will be released and may
be twisted.
4. Unhook the wire tip from the hook of reel.
Fig.13: 1. Hook
5. Make the tip of the wire straight, and pass the wire
through the guide.
Fig.14: 1. Guide
NOTE: If the tip of the wire is bent when it is passed

the tool.
NOTE: If you force the wire when trying to pass it

6. Pull the wire out approximately 10 mm from the tip
of the arm.
Fig.15: 1. Arm 2. Approximately 10 mm
NOTICE: If the length of the pulled-out wire is
󰀩󰀨
or tying strength may be compromised due to
󰀩
7. Rewind the wire to eliminate its slack.
Fig.16
8. Release the lock lever. The release lever returns,
and the wire is held by the left and right gears.
Fig.17: 1. Lock lever 2. Release lever
Fig.18: 1. Gear 2. Path of the wire 3. Wire
NOTICE: When the lock lever is released and
when the left and right gears mesh with each
other, the grooves in the gears form a space. This
space becomes the path for the wire. Make sure
that the wire is passed through this path.
9. Close the reel cover.
Fig.19: 1. Reel cover
Replacing wire guide B
Optional accessory
The wire guide B (in silver color) in the arm can be
replaced with an optional wire guide B (EG) (in black
color) according to the type of tying wire to use.
Find the right combination in the following table. Then
replace the standard equipped wire guide B with an
optional wire guide B (EG) if necessary.
Standard
equipped wire
guide B complete
(silver)
Optional wire
guide B complete
(black)
Annealing iron tie wire
Poly coated tie wire -
Galvanized tie wire -
— : The combination is not valid.
1. Loosen bolts A and B using the hex wrench
included in the tool package.
Fig.20: 1. Hex wrench
Fig.21: 1. Bolt A 2. Bolt B 3. Contact plate cover
4. Standard equipped wire guide B (silver)
NOTICE: Do not forcibly remove any bolts that
cannot be removed using the hex wrench.
2. Pull the contact plate cover up in the direction of
the arrow and remove it. Bolt B will be removed at the
same time.
Fig.22: 1. Contact plate cover 2. Bolt B
3. Remove bolt A, and remove the standard
equipped wire guide B (silver).
Fig.23: 1. Bolt A 2. Standard equipped wire guide
B (silver)
4. Replace the standard equipped wire guide B (in
silver color) with an optional wire guide B (EG) (in black
color).
Fig.24: 1. Optional wire guide B (EG) (in black
color).
5. Align the pipe of the tool with the groove inside the
optional wire guide B (EG) (black), and assemble them.
Fig.25: 1. Pipe 2. Groove 3. Optional wire guide B
(EG) (black).
6. Fix the optional wire guide B (EG) (black) by tem-
porarily tightening bolt A.
Fig.26: 1. Bolt A 2. Optional wire guide B (EG)
(black).
7. Install the contact plate cover in the direction of
the arrow.
Fig.27: 1. Contact plate cover
8. Fix the optional wire guide B (EG) (black) and con-
tact plate cover securely by tightening bolt A and bolt B.
Fig.28: 1. Optional wire guide B (EG) (black).
2. Contact plate cover 3. Bolt A 4. Bolt B
9. 

Fig.29: 1. Contact plate
NOTE: If the contact plate is caught, press it as

Fig.30
OPERATION
Checking before work
CAUTION: If the tool has a safety mecha-
nism-related problem, do not use it. If you continue
to use it, an accident may occur.
Before using the tool, make sure that the safety mecha-
nism operates normally. If the tool operates without the
safety mechanism operating, stop using the tool imme-
diately. Ask your local Makita Service Center for repairs.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita DTR181 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita DTR181 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 38.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info