691779
18
Zoom out
Zoom in
Previous page
1/108
Next page
18 ENGLISH
Error display and error tone
CAUTION: During inspection, be sure to lock the trigger, turn the power off, and remove the battery
cartridge. Failure to do so may cause an accident.
CAUTION: When you turn the power on, never bring your limbs or face close to the binding or rotating
parts of the tool tip.Otherwise,youmaybeinjured.
CAUTION: When the power is turned on, never touch the binding or rotating parts of the tool tip.
Otherwise,youmaybeinjured.
CAUTION: If an error tone sounds, or if the tool malfunctions, immediately stop using the tool.
Error tone and display
If an error occurs, an error tone will sound, and an error number will be shown on the display panel. Refer to the
following table and take appropriate actions. If the error persists, ask Makita Authorized Service Centers for repairs.
Display Symptom Possible cause Solution
1 The tool stops operating. The wire has been used up. Load new tie wire.
Tie wire is not loaded. Load tie wire.
Wire feeding has failed. Check the orientation of the
tie wire.
Unload the tie wire, and load
it again.
Clean the path of wire.
2 The tool stops operating. The curl guide is open. Close the curl guide.
3 The tool does not perform the
tying process in continuous
actuation mode.
The contact plate is caught. Release the contact plate from
being caught.
4 The tool does not start.
The tool stops operating.
The battery has been
discharged.
The temperature of the battery
cartridge is abnormally high.
Recharge the battery.
Cool the battery cartridge
down.
Replace the battery cartridge
with a recharged one.
5 The tool stops operating. The motor is overloaded. Determine the cause of the
obstruction of the motor rotation
and solve the problem.
Motor failure
6 The tool stops operating. The temperature of the tool is
abnormally high.
Cool the tool down.
7 The tool does not start.
The tool stops operating.
Tool failure Ask Makita Authorized Service
Centers for repairs.
OPTIONAL
ACCESSORIES
CAUTION: These accessories or attachments
are recommended for use with your Makita tool
specied in this manual. The use of any other
accessories or attachments might present a risk of
injurytopersons.Onlyuseaccessoryorattachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
Tie wire
Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita DTR180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita DTR180 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 23,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info