Manual Makita DLS111 (page 32 of 244) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

691782

Zoom out

Zoom in

1/244

32 ENGLISH

4. Push the wireless activation button on the tool

briey.Thewirelessactivationlampwillblinkinblue.

►Fig.66: 1. Wireless activation button 2. Wireless

activation lamp

5. Pull the switch trigger of the tool. Check if the

vacuum cleaner runs while the switch trigger is being

pulled.

Tostopthewirelessactivationofthevacuumcleaner,

push the wireless activation button on the tool.

NOTE:Thewirelessactivationlamponthetoolwill

stop blinking in blue when there is no operation for

2 hours. In this case, set the stand-by switch on the

vacuumcleanerto"AUTO"andpushthewireless

activation button on the tool again.

NOTE:Thevacuumcleanerstarts/stopswithadelay.

Thereisatimelagwhenthevacuumcleanerdetects

a switch operation of the tool.

NOTE:Thetransmissiondistanceofthewirelessunit

may vary depending on the location and surrounding

circumstances.

NOTE: When two or more tools are registered to one

vacuum cleaner, the vacuum cleaner may start run-

ning even if you don't pull the switch trigger because

an other user is using the wireless activation function.

Description of the wireless activation lamp status

►Fig.67: 1. Wireless activation lamp

Thewirelessactivationlampshowsthestatusofthewirelessactivationfunction.Refertothetablebelowforthe

meaning of the lamp status.

Status Wireless activation lamp Description

Color

Blinking

Duration

Standby Blue

2 hours Thewirelessactivationofthevacuumcleanerisavailable.The

lamp will automatically turn off when no operation is performed

for 2 hours.

When

the tool is

running.

Thewirelessactivationofthevacuumcleanerisavailableandthe

tool is running.

Tool

registration

Green

20 seconds Ready for the tool registration. Waiting for the registration by the

vacuum cleaner.

2 seconds Thetoolregistrationhasbeennished.Thewirelessactivation

lamp will start blinking in blue.

Cancelling

tool

registration

Red

20 seconds Ready for the cancellation of the tool registration. Waiting for the

cancellation by the vacuum cleaner.

2 seconds Thecancellationofthetoolregistrationhasbeennished.The

wireless activation lamp will start blinking in blue.

Others Red

3 seconds Thepowerissuppliedtothewirelessunitandthewirelessactiva-

tion function is starting up.

Off - - Thewirelessactivationofthevacuumcleanerisstopped.

Cancelling tool registration for the

vacuum cleaner

Perform the following procedure when cancelling the

tool registration for the vacuum cleaner.

1. Install the batteries to the vacuum cleaner and the

tool.

2. Set the stand-by switch on the vacuum cleaner to

"AUTO".

►Fig.68: 1. Stand-by switch

3. Press the wireless activation button on the vac-

uumcleanerfor6seconds.Thewirelessactivation

lampblinksingreenandthenbecomered.Afterthat,

press the wireless activation button on the tool in the

same way.

►Fig.69: 1. Wireless activation button 2. Wireless

activation lamp

If the cancellation is performed successfully, the wire-

less activation lamps will light up in red for 2 seconds

and start blinking in blue.

NOTE:Thewirelessactivationlampsnishblinkingin

red after 20 seconds elapsed. Press the wireless acti-

vation button on the tool while the wireless activation

lamp on the cleaner is blinking. If the wireless acti-

vation lamp does not blink in red, push the wireless

activationbuttonbrieyandholditdownagain.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DLS111 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 37,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DLS111 Manual

Product: