Manual Makita DBN600 (page 10 of 76) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

691775

Zoom out

Zoom in

1/76

10 ENGLISH

NOTE:Ifyoudrivenailscontinuouslyforalongtime,

theexhaustairwillgethotduetotheheatfromthe

motor.

Thetoolemploystwonailingactions:intermittentnailing

(sequentialmode)andcontinuous/intermittentnailing

(continuous mode).

►Fig.15: 1.Switchtrigger2. Contact element

3. Mode selecting switch 4.Sequential

mode 5. Continuous mode

Intermittent nailing (sequential mode)

1. Setthemodeselectingswitchtothesequential

mode.

2. Release the trigger lock.

3. Placeatthecontactelementonthematerial.

4. Pulltheswitchtriggerfullytodriveanail.

5. Todrivethenextnail,releasetheswitchtrigger

andcontactelementonce,andthenrepeatthestep3

and 4 above.

WARNING: Always be sure to rst place the

contact element against the workpiece before

pulling the trigger.

Continuous/intermittent nailing

(continuous mode)

1. Setthemodeselectingswitchtothecontinuous

mode.

2. Release the trigger lock.

3. Pulltheswitchtriggerrstandthenplacethe

contact element against the workpiece.

4. Todrivethenextnail,keepyourngerpullingthe

switch trigger and place the contact element against the

workpiece again.

NOTE:Thistoolstopsautomaticallyunderthefollow-

ingconditions:

• Whenyoureleasetheswitchtriggerorcontact

elementfromworkpiecebeforethetoolnishes

theoperationcompletely.Inthiscase,pullthe

trigger again until the tool turns into standby.

• Whenkeepingeitherpullingtheswitchtrigger

or placing the contact element about 5 seconds

withoutanotheraction.Inthiscase,releasethe

switchtriggerorthecontactelementfromwork-

piece to restart the operation.

Anti dry re mechanism

When the remaining nails in the magazine decrease to

6-9pieces,theswitchtriggercannolongerbepulled.

Atthistime,insertanewstripofnailsinthemagazine

and the switch trigger can be pulled again.

Removing jammed nails

WARNING: Always make sure that the battery

cartridge is removed before removing jammed

nails.

CAUTION: Be sure to lock the latch after

removing jammed nails.

Release the latch and open the door. Remove the

jammednailsandlockthelatch.

►Fig.16: 1. Latch 2. Door

Handling of the nails

Handlenailsandtheirboxcarefully.Ifthenailshave

beenhandledroughly,theymaybeoutofshapeortheir

connectorbreaks,causingpoornailfeed.

NOTICE: Avoid storing nails in a very humid or

hot place or place exposed to direct sunlight.

►Fig.17

MAINTENANCE

CAUTION: Always be sure that the tool is

switched off and the battery cartridge is removed

before attempting to perform inspection or

maintenance.

NOTICE: Never use gasoline, benzine, thinner,

alcohol or the like. Discoloration, deformation or

cracks may result.

TomaintainproductSAFETYandRELIABILITY,

repairs,anyothermaintenanceoradjustmentshould

beperformedbyMakitaAuthorizedorFactoryService

Centers,alwaysusingMakitareplacementparts.

OPTIONAL

ACCESSORIES

CAUTION: These accessories or attachments

are recommended for use with your Makita tool

specied in this manual.Theuseofanyother

accessoriesorattachmentsmightpresentariskof

injurytopersons.Onlyuseaccessoryorattachment

foritsstatedpurpose.

Ifyouneedanyassistanceformoredetailsregard-

ingtheseaccessories,askyourlocalMakitaService

Center.

• Nails

• Makitagenuinebatteryandcharger

• Safetygoggles

NOTE:Someitemsinthelistmaybeincludedinthe

toolpackageasstandardaccessories.Theymay

differfromcountrytocountry.

Ddhdhbhdhdhdnndhdhddbdnndnndnndndndndndndnxjdndjdnndndndhdndndn ddidnenjjd(dndnd HD dndnd. Dan hehrhrhrrhhejejrjehrjdjrjejej Submitted on 10-12-2020 at 11:05
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DBN600 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 16,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DBN600 Manual

Product: