Manual Makita DBN600 (page 9 of 76) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

691775

Zoom out

Zoom in

1/76

9 ENGLISH

NOTE:Useadryclothtowipethedirtoffthelensof

thelamp.Becarefulnottoscratchthelensoflamp,or

it may lower the illumination.

NOTE:Thenailermaynotrenailsevenifthelamp

lights up because the remaining battery power is low.

Inthiscase,chargethebatterycartridge.

ASSEMBLY

CAUTION: Always make sure that your

ngers are not placed on the switch trigger or

the contact element and the battery cartridge is

removed before carrying out any work on the

nailer.

Loading or unloading the nails

CAUTION: Always make sure that the battery

cartridge is removed before loading the nails.

Unintentionalringmaycausepersonalinjuriesand

property damage.

CAUTION: Do not abruptly slide the pusher

lever on the magazine loaded with nails.

Accidentallydroppingnailsespeciallywhenworking

inhighplacesmaycausepersonalinjuries.

CAUTION: Load the nails in the correct direc-

tion. Loading in wrong direction may cause prema-

turewearandtearofthedriveranddamageofthe

other parts.

CAUTION: Do not use deformed connected

nails.Usenailsspeciedinthismanual.Usingnails

otherthanthosespeciedmaycausethenailjam-

mingandbreakageofthenailer.

1. Remove the battery cartridge.

2. Pullthepusherleverdownwarduntilitlockswith

a little click.

►Fig.8: 1.Pusherlever

3. Insert a connected nails into the slit on the bottom

ofthemagazine.

►Fig.9: 1.Slit2. Connected nail

4. Pressthepusherbutton.

Thepusherleverisunlockedanditholdsthenailsin

the magazine.

►Fig.10: 1.Pusherbutton

CAUTION: Be careful not to place your nger

on the rail of the pusher lever when pressing

the pusher button.Thepushermayhityournger

stronglyandcauseinjury.

NOTICE: If the inserted connected nails remain

in the bottom of the magazine, pusher lever does

not return even if you press the pusher button.

Bring the connected nails into the magazine so that

the entire connected nails can be seen.

Toremovenails,followtheinstallationproceduresin

reverse.

Nose adapter

CAUTION: Always make sure that your

ngers are not placed on the switch trigger or

the contact element and the battery cartridge is

removed before installing the nose adapter.

Whenringnailsonthematerialwitheasily-marred

surfaces,usethenoseadapter.Putthenoseadapter

onthefrontendofthecontactelement.

Make sure that the nose adapter completely covers the

frontendofthecontactelementasillustrated.

►Fig.11: 1. Nose adapter 2. Contact element

You can store the nose adapter on the holder on the

magazinetokeepitfrombeinglost.

►Fig.12: 1. Nose adapter 2. Holder

Hook

CAUTION: Do not hang the hook from the

waist belt.Droppingthenailer,whichiscausedby

thehookaccidentallycomingoutofplace,maycause

unintentionalringandresultinpersonalinjuries.

►Fig.13

Thehookisconvenientfortemporarilyhangingthetool.

Thiscanbeinstalledoneithersideofthetool.

Toinstallthehook,insertitintoagrooveinthetool

housing on either side and then secure it with a screw.

Toremove,loosenthescrewandthentakeitout.

►Fig.14: 1. Groove 2. Hook 3.Screw

OPERATION

Inspecting trigger function

CAUTION: Make sure that the trigger function

is in working order before each operation. The

tool must not operate only by pulling the trigger

or only by placing the contact element against the

workpiece. If you nd such issues, contact Makita

authorized service centers for repairs.

CAUTION: Before installing the battery car-

tridge into the tool, always check to see that the

switch trigger actuates properly and returns to

the "OFF" position when released.

Driving nails

WARNING: Continue to place the contact

element rmly on the material until the nail is

driven completely.Unintentionalringmaycause

personalinjuries.

CAUTION: Do not drive nails on hard mate-

rials such as metal or the like.Ifthenailcannot

penetratethematerial,thenailermaybekickedback

towardyouandcauseinjury.

Ddhdhbhdhdhdnndhdhddbdnndnndnndndndndndndnxjdndjdnndndndhdndndn ddidnenjjd(dndnd HD dndnd. Dan hehrhrhrrhhejejrjehrjdjrjejej Submitted on 10-12-2020 at 11:05
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DBN600 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 16,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DBN600 Manual

Product: