598440
16
Zoom out
Zoom in
Previous page
1/28
Next page
16
Operation
Since you have performed all the preparations, the brushcutter
can now be put into operation.
The brushcutter is not allowed to be star-
ted until it has been completely assem-
bled (see chapter "Preparations") and a
functional test has been carried out!
Observe the accident prevention regulations!
For all work performed with the brushcutter:
Wear protective gloves!
Wear safety shoes!
Wear a helmet as well as face, eye and hearing
protection!
Never work alone. In case of emergencies,
another person must be within shouting
distance. Before beginning to work, in-
form the other person about the protective
devices available on the machine!
The cutting tool must be equipped with the
appropriate cutter guard. Never operate the
machine without the cutter guard.
In the case of noticeable changes in the behavior
of the machine, turn off the engine immediate-
ly.
If the cutting tool comes into contact with stones
or other hard objects, turn off the engine imme-
diately and check the cutting tool.
Checking the reliable operating condition of the
brushcutter
Before starting the brushcutter, always make sure that
the cutting tool (
1) ts rmly.
upon being released, the throttle lever (
2) returns to zero
position automatically.
the safety locking button (
3) is functioning.
If the safety locking button (3) is not pressed, it
must also not be possible to press the throttle
lever (2) all the way down.
the start-stop switch (
4) (short-circuit switch) is functioning.
the handles (
5) are clean and dry.
the cutter guard (
6) has not been damaged and is rmly
installed in correct position.
1
5
5
2
4
3
6
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita BCX3410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita BCX3410 in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita BCX3410

Makita BCX3410 User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info