598440
15
Zoom out
Zoom in
Previous page
1/28
Next page
15
3
2
4 Screw the tank cap on tightly again.
5 Clean the tank cap and the surrounding area thoroughly.
When laying down the dipstick, make sure that
it does not come into contact with dirt under no
circumstances whatsoever! Remove dirt imme-
diately whenever necessary!
6 Turn the dipstick (
2) out of the opening anticlockwise.
7 Upon rst-time operation of the brushcutter, use a suitable
lling bottle to ll 80 cm
3
of engine oil up to the bottom edge
of the lling opening (3).
An engine oil bottle can be used for precise do-
sing without spilling engine oil (see extract from
the spare parts list).
9 Turn the dipstick back in again.
Following rst-time operation of the brushcutter,
the engine oil must be changed after 20 hours of
operation and not after 50 hours of operation.
Putting on the shoulder strap
1 Put on the shoulder strap as shown in the illustration.
2 Adjust the shoulder strap so that the fastening hook (
1) for
the brushcutter is situated at the height of your hip bone.
The shoulder straps of the BCX3410 brushcutters
are not equipped with a hip protection pad.
Balancing the brushcutter
To balance the brushcutter, the machine must have been re-
fueled and lled with oil (see section "Refueling the brushcutter"
in this chapter).
The ground clearance depends on the selected cutting tool.
When a line trimmer head is being used on level ground, the
line trimmer head should be resting on the ground lightly without
the operator touching the machine with his hands.
When the 4-tooth star blade is being used on difcult ground,
the cutting tool must be resting approx. 20 cm above the ground
without the operator touching the machine with his hands.
The tool you will require, if appropriate, is the Phillips screwdri-
ver.
1 Hook the fastening hook (
1) of the shoulder strap, depending
on the cutting tool, into one of the two holes of the strap
holder (2).
If the adjustment option is not sufcient:
2 Undo the screw (
3) slightly.
3 Push the strap holder into the desired position on the main
tube.
4 Retighten the screw rmly.
At this point, the adjustment of the handles to suit
your body should also be carried out again.
1
1
2
3
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita BCX3410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita BCX3410 in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita BCX3410

Makita BCX3410 User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info