578638
10
Zoom out
Zoom in
Previous page
1/19
Next page
24
25
UK
The Web interface
Start
IRL
UK IRL
4. Click on “Repeater“ to start the assistant. All available
wireless 2.4G and 5G access points are listed.
5. Select the access point to which the repeater is to be
connected and click on “Continue.
NOTE!
If the desired Access Point is not listed, ensure
that it is active and place the repeater closer to
the Access Point. Next click on “Update” to re-
fresh the list of available wireless access points.
6. The log-in window for the selected access point
appears.
7. Enter the network key and click on “Continue”.
8. To close down the Assistant and use the repeater in
the network, select the entry “Accept”.
9. Wait a few seconds whilst the repeater restarts. After
having restarted the repeater you can log into the
access point from the list of available networks with
your computer and through the repeater.
NOTE!
By default, the network detection is the same as
the SSID of the access point to which the repea-
ter is connected. You can, however, also assign
a different network code.
The Web interface
The Web interface allows you to configure the repeater
and to, e.g. set up the WPS connection, if it could not be
set up.
Depending on the selected mode the appearance of the
Web Interface changes, as selection options relevant for
the selected operating mode are shown or hidden.
Logging into the Web interface
1. Enter the default user name “admin” and the default
password “admin”. Click on “Ok”.
2. The start page of the configuration menu of the WLAN
repeater opens. The contents of the individual menus
differ depending on which mode has been set on the
repeater.
Start page
The start page contains all information about the repea-
ter and its settings.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maginon WLR-510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maginon WLR-510 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Maginon WLR-510

Maginon WLR-510 User Manual - German - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info