578638
9
Zoom out
Zoom in
Previous page
1/19
Next page
22
23
UK
Start
Start
IRL
UK IRL
Installation using the WPS key (repeater mode)
The quickest, easiest and reliable way to establish a wi-
reless connection between the repeater and the WLAN
router, is the WPS button.
NOTE!
This connection method requires both devices
to contain a WPS button. As factory setting, the
WPS button is set to 2.4G radio mode. To log-in
as a dual band router, whose WPS function is
activated in the 5G radio mode, the WPS button
of the Web Interface must first be set to the 5G
radio mode.
1. Hold down the WPS button on the repeater for at least
5 seconds.
2. After 5 seconds the Power/WPS LED flashes three
times.
3. The WPS function is now active and waits for the WPS
connection.
4. Next press the WPS button of your router to be
connected to the repeater. This step must be carried
out within two minutes. The connection is set up and
the network information is exchanged.
5. When the connection has been established, the Pow-
er/WPS LED is lit permanently.
6. If the Power/WPS LED flashes, a connection fault has
occurred. Wait two minutes until the LED is switched
off and restart the connection.
7. The 5G and 2.4G signal LEDs show whether or not the
connection is fully set up.
8. Use the Web interface in order to call up the extended
settings after successful WPS connection or to ma-
nually establish the connection in case of a failed WPS
connection.
After having restarted the repeater you can log into
the access point with your computer through the
repeater. The network detection is the same as the
SSID of the access point.
The network key and the encoding are handled by
the router.
Manual installation through WEB interface
1. Connect the LAN connection of your computer to the
LAN socket of the repeater using the LAN cable. When
logging in as “Wi-Fi repeater” you can alternatively
use the WLAN interface of your computer. Search
amongst the available wireless networks for the
network “Wi-Fi repeater” and connect to the network.
Dismiss the Windows suggestion of setting up the
network through Windows Setup and select the opti-
on “Connect to network without setup”.
2. Open your Web browser and enter IP address
192.168.10.1.
3. The log-in window of the repeater appears. Enter the
default user name “admin” and the default password
“admin”. Click on “Ok”.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maginon WLR-510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maginon WLR-510 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Maginon WLR-510

Maginon WLR-510 User Manual - German - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info