578638
8
Zoom out
Zoom in
Previous page
1/19
Next page
20
21
UK
Start
Start
IRL
UK IRL
Use the Access Point Mode if you wish to use the repeater
as Wireless Access Point. In this operating mode, the
repeater or wireless communication devices is an inter-
face to the network. You can for instance connect the
repeater to a network router that does not have a WLAN
interface allowing devices to access the network router
via the repeater.
1. Set the mode selection switch to Access Point.
2. Connect the repeater to an easily accessible mains
socket.
3. Switch on repeater using the ON/OFF switch. The Po-
wer/WPS LED is now lit permanently .
Installation as Access Point
1. Connect the LAN connection of your computer to the
LAN socket of the repeater using the LAN cable. OR
alternatively you can use the WLAN interface of your
computer. Search amongst the available wireless net-
works for the network “Wi-Fi repeater” and connect to
the network.
2. Dismiss the Windows suggestion of setting up the
network through Windows Setup and select the opti-
on “Connect to network without setup”.
3. Open your Web browser and enter IP address
“192.168.10.1“. The log-in window of the repeater
appears.
4. Enter the default user name “admin” and the default
password “admin”. Click on “Ok”. Click on “Access
point“ to start the assistant.
5. Enter an SSID (network detection) through which the
repeater is to be identified as AP in the network. Click
on “Continue”. The standard SSID for the 2.4G network
is “Wi-Fi repeater“:
6. Set up a network encoding. Possible encoding: Deac-
tivate, WEP, WPA PSK, WPA2 PSK, WPA/WPA2 PSK
7. When all connection data have been set up click
on “Accept. Wait a few seconds whilst the repeater
restarts. After the restart has been completed, the
repeater is available as a wireless access point.
8. Connect the LAN connection of the WLAN repeater to
the LAN socket of the home router or a network socket
of your home network using the LAN cable.
9. Clients (other computers or WLAN-capable devices)
can be selected on the WLAN repeater. Either by using
the initially set network key o the repeater or the WPS
key, by pressing it briefly and waiting until the Power/
WPS LED flashes.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maginon WLR-510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maginon WLR-510 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Maginon WLR-510

Maginon WLR-510 User Manual - German - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info