782325
41
Zoom out
Zoom in
Previous page
1/60
Next page
Bevel rip cutting
Bevel rip cutting is the same as ripping, except that the blade bevel angle is set to
an angle other than “0”.
> Adjust the saw blade to the desied bevel angle. Make sure the bevel locking
handle is locked firmly.
> Follow the same instruction of “ Rip cutting ”.
Fig. 15
the work piece that will pass between the blade and the fence.
> Do not place your thumbs on the table top. Always hold the work piece while the
blade is turning. Do not let go of it in order to reach for the push stick. When both
thumbs touch the front edge of the table, complete the cut using a push stick.
> Always use the push stick when performing ripping operations.
> Continue to push the work piece with the push stick until it passes the
blade guard and clears the rear of the table.
> Do not pull the work piece backward while the blade is turning. Turn the switch
OFF, and unplug the power cord. Wait until the blade comes to a complete stop
and slide the work piece out.
In more detail…
In more detail…
Product functions
MSTS1500-A by MacAllister
41
EN
Warning: Risk of injury!
The work piece and the fence must be on the right side of
the blade when cutting.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mac Allister MSTS1500-A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mac Allister MSTS1500-A in the language / languages: English as an attachment in your email.

The manual is 4.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info