586988

Lynx L22 Manual

13
Zoom out
Zoom in
Previous page
1/36
Next page
Page 13
Mixer Reference
The Lynx L22 Mixer provides complete software control of the audio features of the
Lynx L22 and an indication of signal level during recording and playback. This section
describes the function of each menu and control of the mixer.
Mixer Menu
With one Lynx L22 installed in your computer the first selection in the Mixer Menu
will be “Lynx L22 Mixer” proceeded by a check mark. With more than one Lynx audio
interface installed in your computer, the Mixer Menu will list each audio Lynx audio
interface with a numeric suffix, and allow you to select which card is being controlled
by the Mixer application. A check mark will appear next to the currently selected Lynx
audio interface. Refer to the section on “Configuring Multiple Lynx L22’s” for a more
information regarding the use of multiple cards.
Adapter Window
Sample Clock – This section of the Lynx L22 mixer provides control of the sample
clock source and reference. Since the sample clock is the master timing source, all
Lynx L22 audio devices on a single card must have identical sample rates. Sample
clock settings cannot be changed if any Lynx L22 audio device is playing or
recording.
Source – Allows selection of the sample clock source from one of the following:
Internal – Clock derived from the on-board crystal oscillator.
Digital – Clock signal from the DIGITAL IN connector on the L2Sync cable.
The Digital Format control must be correctly selected when selecting
this clock source.
External – Clock signal from the SYNC IN connector on the L2Sync cable.
Header – Clock signal from the board-mounted CLOCK IN header.
LStream 1 – Clock signal from the LStream port on the L2Sync connector.
LStream 2 – Clock signal from the LStream port on the board mounted header.
Reference – Provides selection of the clock source reference type from one of the
following:
Auto – Automatic selection. Valid for Internal and Digital clock sources.
13.5MHz – 13.5MHz video dot clock. Valid for External and Header clock
sources.
27MHz – 27MHz video dot clock. Valid for External and Header clock
sources.
Word – Word clock. Valid for External and Header clock sources.
Word256 – 256 times word clock. Valid for External and Header clock sources.
Rate – Displays the current sample clock rate of the Lynx L22. When the Sample
Clock Source/Reference are set to Digital/Auto, External/Word, External/
Mixer Reference
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lynx L22 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lynx L22 in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info