586988
12
Zoom out
Zoom in
Previous page
1/36
Next page
Page 12
Using Your LynxTWO
Windows Quick Audio Test
The installation of your Lynx L22 can be tested using the Lynx L22 Mixer and the
Sound Recorder application that ships with Windows 98/ME and Windows NT/2000/
XP. Any other audio application capable of audio recording and playback can be used
in a similar manner.
1. Connect a stereo analog signal source to the IN 1 and IN 2 connectors on the
Audio cable.
2. Connect the OUT 1 and OUT 2 connectors to an amplifier or mixer capable of
delivering an audio signal for listening via headphones or speakers.
3. Open the Lynx L22 Mixer by double clicking on the mixer icon.
4. In the Lynx L22 Mixer, set the Trim to either +4 dBu or -10 dBV to match the
signal level of the connected equipment.
5. In the Lynx L22 Mixer Record Panel, route the Record 1 Left & Right signal from
the Analog In 1 & 2 to the Analog Out 1 & 2. This is done by pressing the “1”
button for Record 1 Left and pressing the “2” button for Record 1 Right. Unmute
the Monitor Mute buttons for both the left and right channels. You should hear the
signal from the audio source which is connected to the analog inputs. If this is not
the case, check your connections.
6. Disable input monitoring by again clicking on the Mute buttons on the Record 1
device. After doing so, the buttons should look like they are in the “out” or non-
depressed position.
7. Start Sound Recorder by clicking Start > Programs > Accessories > Multimedia >
Sound Recorder. Position Sound Recorder on your screen so it be easily viewed
along with the Lynx L22 Mixer.
8. In Sound Recorder, select the Lynx L22’s audio devices by opening the Edit menu
and selecting Audio Properties. Select Lynx L22 Play 1 as the Preferred device
for playback and Lynx L22 Record 1 as the Preferred device for recording.
9. Record a short sample by clicking the red record button followed by the stop
button in Sound Recorder. During recording, you should observe a graphic display
of the waveform being recorded in the center display in Sound Recorder. You
should also see activity on the Record 1 peak meters of the Lynx L22 Mixer.
10. Playback the test sample by clicking the play button in Sound Recorder. During
playback, you should observe a graphic display of the waveform being played in
Sound Recorder. You should also hear the recorded audio and see activity on the
Analog Out peak meters of the Lynx L22 Mixer.
If the test did not operate as described or you received any errors, please refer to the
“Troubleshooting” section of this manual.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lynx L22 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lynx L22 in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info