708397
20
Zoom out
Zoom in
Previous page
1/36
Next page
-14-
(GB)
!
Do not refill fuel when the engine is in operation or when it is hot. Only refill fuel in an open area and do not smoke during
refilling. The fuel may only be stored in containers intended for this purpose.
! Do not start up and leave the engine running in closed areas where there is risk of dangerous concentration of the poisonous
carbon monoxide.
! You must not touch the exhaust and cylinder ribs in case of hot or running engine. This could lead to burns.
!
In case of works on the cutting mechanism, wait for the knife to stop. Remove the end piece from the spark plug in order to
prevent engine start-up When dismounting the knife, use increased caution. The knife edges are sharp, use gloves.
! Do not operate the machine without safety and protective covers and do not operate a machine with damaged protective and
safety equipment.
IV. Main Technical Data
Trade name
BRAVO
Supply number 5317 5317MB 5317AG
Length 1,500 mm
Height 1,100 mm
Transport height 660 mm
Width 660 mm
Weight 70 kg
Max. coverage 550 mm
Engine
Briggs-
Stratton
850 Series
Honda GCV
160
Honda GCV
190
Output (kW)
4,4 4,1 4,9
Max. operating revolutions (RPM)
3000 3000 3000
Guaranteed acoustic power level L
wa
(according to ČSN ISO 11 094) (dB)
90 92 94
Resulting weighted vibration value
(according to ČSN EN 836+A1 change A2) (m/s2)
2,8 1,6 2,1
Noise level at the operating position L
A
(according to ČSN EN ISO 11 201) (dB)
76,6 80,3 82,8
V. Preparations for Use
Check the fixing of the mulching knife and its integrity.
Before first engine start-up, check the oil level on the gauge; refill the oil if necessary.
2. Handlebar Adjustment
Change the handlebar position by loosening the nut with lever (1) and readjusting the upper handlebar part to the lower part.
Then tighten the nut with lever. It is advisable to adjust the nut lever to a horizontal position, so that it does not impede
starting, Fig. 2.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lumag HGM-85055 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lumag HGM-85055 in the language / languages: English as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info