708397
19
Zoom out
Zoom in
Previous page
1/36
Next page
-13-
(GB)
III. Safety Instructions
The following symbols are located on the machine:
The user of the machine is responsible for accidents or dangers arising to other persons or their property. Thus, the person
has to take into consideration that other persons and animals are located at a safe distance of at least 30 meters from the machine (Fig.
1). In case the operator discovers the presence of persons and animals within a dangerous distance, he must immediately turn off the
machine and not start it until this area is clear.
! Do not let children and persons unfamiliar with these instructions operate the machine. Abide by local regulations concerning
minimum age of operators.
! Do not operate the machine in case you are sick or under the influence of alcohol, drugs or medicines.
! Before starting work, make sure that the machine is in good technical condition. Never mow if any part is damaged or loose.
Tighten loose connections, replace damaged parts. Use original spare parts only.
! Before starting work, make sure that the area you are about to mow does not contain any solid objects in the vegetation
(stones, wires, pipes, massive branches, and the like) that must be removed, since they could be shot out or could damage the
mulching knife.
! Always use working boots and long trousers at work. Do not work without shoes or in light sandals.
! Use safety goggles during operation.
! During backward movement with the machine there is danger of tripping, thus you should exert utmost caution.
! You must not lift the machine. The machine may only be inclined during operation when the cutting knife is turned to the
opposite direction than the operator is standing.
! Before transport and during movement outside the mowed area, the engine must be turned off and the mulching knife
movement stopped.
! Do not work on steep slopes. Observe the max. inclination specified by the engine manufacturer in the engine manual.
Read the instructions for use before putting into operation!
When performing repairs on the cutting mechanism, remove
the high-voltage cable from the plug!
Beware, burn injury hazard!
Max. slope accessibility
Beware, rotating parts running down!
Maintain a safe distance from the machine, danger of injury
by a flying object!
Beware, rotating cutting tool!
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lumag HGM-85055 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lumag HGM-85055 in the language / languages: English as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info