599448

Lowrance StructureScan Sonar Imaging Manual

7
Zoom out
Zoom in
Previous page
1/12
Next page
7
Jackplate Mount
You can mount the StructureScan transducer inside or outside of the jackplate by
drilling through the jackplate, then inserting bolts though hinge hole in the side of
the bracket mount into the jackplate.
Jackplate Mount Supplies (not included)
M6 or 1/4” Drill bit (Jackplate Mount) pilot holes 1/4” (M6) jackplate mount bolts
To Mount StructureScan on Jackplate:
Choose a transducer location on the inside or outside of the 1.
jackplate.
Adjust the jackplate up and down to make sure the transducer will 2.
not obstruct jackplate movement.
Make sure nothing blocks the 3.
sonar beam on either side of
the StructureScan transducer.
Route the transducer cable to 4.
the location where the LSS-1
will be installed.
Move the transducer bracket 5.
into the desired position and
then use a pencil to mark the
holes through the hinge hole
and hole in the bracket mount
on the side of the bracket.
Using a M6 or equivalent drill 6.
bit, drill the holes into the
jackplate.
Slide the bracket inside the 7.
jackplate and align the bracket
holes with holes you drilled in
the jackplate.
Slide M6 bolts with washers 8.
into each hole on the side of
jackplate.
Guide the bolts through the StructureScan bracket holes.9.
Place a washer over the end of the bolts and tighten the nuts. 10.
Connect the transducer cable to the LSS-1 sonar port. 11.
StructureScan bracket
mounted inside the
jackplate. The bracket
can also be installed
on the outside of the
jackplate.
Jackplate
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance StructureScan Sonar Imaging at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance StructureScan Sonar Imaging in the language / languages: English as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lowrance StructureScan Sonar Imaging

Lowrance StructureScan Sonar Imaging User Manual - English - 24 pages

Lowrance StructureScan Sonar Imaging User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info