599448
9
Zoom out
Zoom in
Previous page
1/12
Next page
9
Direct/Step Mount (No Bracket)
When using the direct mount installation shown below, you MUST turn on the Flip
Left/Right feature. Refer to your Operation manual for more information.
Direct Step Mount Supplies (not included)
3/32 Drill bit (Direct/Step mount pilot holes)
Marine grade above- or below-
waterline sealant
To use Direct Mount:
Make sure the boat’s step is the same length or longer than the 1.
StructureScan transducer.
After selecting a mounting location, route the transducer cable to 2.
the location where the LSS-1 will be installed.
Hold the transducer 3.
in the desired
position and then use
a pencil to mark pilot
holes through the
mounting holes on
the transducer.
Drill the pilot holes. 4.
Apply a high-grade 5.
above- or below-
waterline sealant to
the pilot holes.
Align the transducer 6.
mounting holes over
the pilot holes and
mount the transducer
to the step using self-tapping metal screws (not supplied). Do NOT
overtighten the screws; otherwise you could strip out the berglass
pilot holes or crack the mounting holes on the StructureScan
transducer.
Connect the transducer cable to the LSS-1 and then turn on the Flip 7.
Left/Right feature in your display unit.
View underneath the step
Do not install
under boat hull!
NOTE: When using a Direct Step Mount, you must turn on the Flip
Left/Right feature in your display unit to ensure what is shown on the
left/right side on your display, corresponds with what is on the left/right
side of your boat.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance StructureScan Sonar Imaging at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance StructureScan Sonar Imaging in the language / languages: English as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lowrance StructureScan Sonar Imaging

Lowrance StructureScan Sonar Imaging User Manual - English - 24 pages

Lowrance StructureScan Sonar Imaging User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info