599448

Lowrance StructureScan Sonar Imaging Manual

6
Zoom out
Zoom in
Previous page
1/12
Next page
6
Transom Mount
The StructureScan transducer can be mounted just like a skimmer transducer, where
it is in the water when you are on plane or can be mounted so it is only in the water,
when you are moving at trolling speed.
Transom Mount Supplies (not included)
1/8” Drill bit (Transom mount pilot holes)
Marine grade above- or below-
waterline sealant
Transom Mount (Aluminum Hull) Supplies (not included)
M4 Machine Screws
Marine grade above- or below-
waterline sealant
Starboard (prevents corrosion between bracket and aluminum hull)
To Mount StructureScan on Transom:
Choose a transducer location and then route the transducer cable to 1.
the location where the LSS-1 will be installed.
Place the transducer bracket against the transom and then align 2.
the bottom of the transducer
with the bottom of boat. Use
a pencil to mark the pilot
holes through the slots in
the transducer bracket.
Drill the pilot holes into the 3.
boat’s transom.
Apply a high-grade above- 4.
or below-waterline sealant
to the pilot holes.
Align the bracket slots over 5.
the pilot holes and fasten
the bracket to the transom
using your drill and the
supplied screws.
To make adjustments to transducer position, loosen the screws and 6.
slide bracket up or down.
Connect the transducer cable to the LSS-1 sonar port. 7.
StructureScan transducer mounted on
transom.
CAUTION: If you have an aluminum boat, install a piece of marine
starboard between the stainless steel StructureScan transducer bracket
and the transom to prevent corrosion.
!
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance StructureScan Sonar Imaging at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance StructureScan Sonar Imaging in the language / languages: English as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lowrance StructureScan Sonar Imaging

Lowrance StructureScan Sonar Imaging User Manual - English - 24 pages

Lowrance StructureScan Sonar Imaging User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info