757004
95
Zoom out
Zoom in
Previous page
1/124
Next page
97
User Manual
'<PAGE>'
Fig. 5c - Graphic Data Page
Grounding Alarm
The chart plotter is provided with a function that, by querying the map's data, verifies potential danger
to navigation due to shallow water, land, rocks, obstructions and shoreline constructions. The maps
are scanned periodically (every 10 seconds). When the Grounding Alarm is active, the chart plotter
scans an area in front of the boat. This area is identified by a triangle drawn in front of the boat icon
whose direction is determined by the current boat heading. The length of the triangle is user selectable
and its angle is 30 degrees. If any of the above objects are found, the chart plotter notifies the danger on
a dedicated warning message box in the Grounding Alarm Report page. The Grounding Alarm is
switched Off by default after a Master Reset. Once the Grounding Alarm has been activated, a warning
message is shown.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ALARMS" + 'ENTER' + "GROUNDING ALARM"
+ 'ENTER'
Note
The Grounding Alarm function only operates with the new C-CARDs. It also affects the speed
of the redraw of the screen. If this function is not used it maybe disabled.
Grounding Alarm Range
Allows setting the length of the sector to be detected among 0.25, 0.5, 1.0 Nm. The default setting is
0.25 Nm. When any of the searched objects is found in the scanned area, a tick marker is printed on the
relative box in the Grounding Alarm Report page to identify which dangerous objects have been cur-
rently detected.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ALARMS" + 'ENTER' + "GROUNDING ALARM
RANGE" + 'ENTER'
Grounding Alarm Report
Allows displaying the report of the dangerous objects currently detected.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ALARMS" + 'ENTER' + "GROUNDING ALARM
REPORT" + 'ENTER'
Grounding Alarm Width
Allows setting the width of the sector to be detected among Thin, Medium and Large. The default
setting is Large.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ALARMS" + 'ENTER' + "GROUNDING ALARM
WIDTH" + 'ENTER'
Heading (Simulation)
Sets the desired value for heading in Simulation mode. The default setting is 000° M.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SIMULATION" + 'ENTER' + "HEADING" +
'ENTER'
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorenz MAGNUM PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorenz MAGNUM PRO in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info