757004
93
Zoom out
Zoom in
Previous page
1/124
Next page
95
User Manual
'MENU' + "BASIC SETTINGS" + 'ENTER' + "C-VOICE" + 'ENTER' + "ECHOSOUNDER" + 'ENTER'
Event
User point that refers to the ship's position. It is simply a way of marking where the boat is (see Par.
4.2). An existing Event can be connected to the current route.
External Alarm
Allows triggering an external alarm device. You can enable (On) or disable (Off) the External Alarm.
The default setting is On.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ALARMS" + 'ENTER' + "EXTERNAL ALARM"
+ 'ENTER'
External Signal
Sets the External Output. Then choose your preferred setting among External Alarm (when activated,
this pin goes to GND level. It is used to command an external buzzer), External Power (it is command
switch for the Radar. It must be used in conjunction with the Radar Junction box device) and Off.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' + "EXTERNAL SIG-
NAL" + 'ENTER'
External Waypoint
The coordinates of a Waypoint, received from a GPS or a LORAN connected to the chart plotter, can
be stored into the chart plotter, if the GPS or the Loran are NMEA-0183 protocol compatible and
support the $BWC sentence (this symbol remains on the screen for 30 seconds). You may save it by
placing a Waypoint or a Mark onto that symbol. As soon as the chart plotter receives another $BWC
sentence with the coordinates of a new Waypoint, the symbol moves to the new point. The default
setting is Off.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SETUP" + 'ENTER' + "EXTERN WPT" + 'ENTER'
File
It is a collection of information (of the same type) stored on a User C-CARD. Each file must have a
unique name, ideally one that describes its contents. Filenames are kept in a directory on each User C-
CARD (see Par. 4.6).
Filter Dump
Sets the Filter step. Move cursor key up/down to insert value in the range [500 - 12000], move it to the
left/right to move the cursor, press 'ENTER'. A bigger value means on heavy filter and it is applied to
both position and speed filter. The default value is 500.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "FIX" + 'ENTER' + "FILTER DUMP" + 'ENTER'
Find
The chart plotter allows finding Nearest Services, Port By Name, Port By Distance, Tide Stations,
Wrecks, Obstructions, Points Of Interest, Lakes By Name, Lakes Information.
'MENU' + "FIND" + 'ENTER'
Fix (menu)
Turns On/Off the Dead Reckoning, Fix Correction, the Position Filter and the Speed Filter, enables
the Compute Correction and Correction Offset functions, sets the desired value for Filter Dump and
Static Navigation.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "FIX" + 'ENTER'
Fix Correction
Turns On/Off the Correction from the positioning system. If the new Correction is calculated, but the
Correction is not enabled, the ship's position is not changed. The default setting is Off.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "FIX" + 'ENTER' + "FIX CORRECTION" + 'ENTER'
Fix Datum
Selects the Fix Datum. WGS 1984 is the default Fix Datum.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' + "FIX DATUM" + 'ENTER'
93


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorenz MAGNUM PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorenz MAGNUM PRO in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info