757004
97
Zoom out
Zoom in
Previous page
1/124
Next page
99
User Manual
'MENU' + "BASIC SETTINGS" + 'ENTER' + "LANGUAGE" + 'ENTER'
Latitude
The angular distance North or South of the equator measured by lines encircling the earth parallel to
the equator in degrees from 0° to 90°.
LAT/LON
Coordinate system using Latitude and Longitude coordinates to define a position on earth.
Lat/Lon Grid
Turns On/Off the displaying of the Latitude and Longitude Grids. The default setting is On.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER' + "Lat/Lon Grid"
+ 'ENTER'
Load (file)
Loads file from User C-CARD.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER C-CARD" + 'ENTER' + "LOAD" + 'ENTER'
LOG
Speed of the vessel relative to the water.
Longitude
The angular distance East or West of the prime meridian (Greenwich meridian) as measured by lines
perpendicular to the parallels and covering at the poles from 0° to 180°.
Loran
The Loran Chains are groups of transmitting stations that use timed radio pulse transmissions.
Magnetic Deviation
The angle between the Magnetic North and the Compass North.
Magnetic Variation
The angle between the magnetic and geographic meridians at any place, expressed in degrees West or
East to indicate the direction of magnetic North from true North. It changes from point to point, and
(at the same point) with time.
Map Datum
Selects the Map Datum. WGS 1984 is the default Map Datum.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' + "MAP DATUM" +
'ENTER'
Map Orientation
Selects the orientation of your chart according to: North (the map is shown with North upwards),
Head (the map is shown with the ship's current heading upwards), Course (the map is displayed with
the currently selected course leg upwards). The default setting is North. See also par. 3.3.
'MENU' + "MAP SETTINGS" +'ENTER' + "Map Orientation" + 'ENTER'
Map Setting (menu)
One of the many advantages of the C-MAP cartography is the ability to select the information you
want to display. The user may choose either to display or not on the screen the selected objects, de-
pending on his specific requirement. Use the Map Setting menu to select the cartographic objects to
display on the screen.
'MENU' + "MAP SETTINGS" +'ENTER'
Mark
Reference points related to cursor position (see Par. 4.2). An existing Mark can be connected to the
current route.
Mixing Levels
Turns On/Off. When the map coverage at the current zoom level does not fill the entire screen, the
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorenz MAGNUM PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorenz MAGNUM PRO in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info