757004
87
Zoom out
Zoom in
Previous page
1/124
Next page
89
User Manual
Auto Info
The type of Automatic Info is user selectable. The possible settings are: Off: disabled, no automatic info
shown at all; On Points: only on points. This is the default setting. On All: on all objects (points, lines
and areas).
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SETUP" + 'ENTER' + "AUTO INFO" + 'ENTER'
AUX IN I/O Cable Wiring
Displays the Cable Wiring page for AUX IN I/O.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +"AUX IN I/O CABLE
WIRING" + 'ENTER'
Azimuth
The angular measurement from the horizon to a satellite or another object.
Basic Mode
The chart plotter can operate in two different modes: Basic Mode and Advanced Mode. In the first
mode there is a restricted number of functions, and it is not possible to handle Waypoints, Marks,
Events and A-B-C-D function.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "ADVANCED FUNCTIONS" + 'ENTER' + "Off" + 'ENTER'
Basic Settings (menu)
Enables or disables Advanced Functions, Page Preview and Depth Window; selects the Language, sets
the desired setting for Distance, Speed, Depth, Temperature and Altitude unit, Nav Aids Presentation,
Course Vector, User Points, Screen Amplifier and select the Input/Output menu and C-Voice mode.
'MENU' + "BASIC SETTINGS" + 'ENTER'
Beacon
A prominent, specially constructed object forming a conspicuous vertical mark as a fixed aid to navigation.
Bearings
Selects either degrees Mag or True. If magnetic readings are selected the variation is computed auto-
matically for every zone as soon as the chart is displayed. The default setting is Mag.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "COMPASS" + 'ENTER' + "BEARINGS" + 'ENTER'
Beeper
Turns On/Off the sound after pressing a key ("beep"). The default setting is On.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SETUP" + 'ENTER' + "BEEPER" + 'ENTER'
BRG = Bearing
It is the angle between the North (True or Magnetic) and a destination. It represents the direction to
follow.
Buoy
A floating object moored to the sea bottom in a particular (charted) place, as an aid to navigation.
Buoys & Beacons
Buoys and Beacons are used to indicate to mariners recommended or established routes, underwater
dangers, restrictions and regulations. They can be lighted or not and - for the color chart plotter - are
colored according to their international code.
Calibration
The variation table is used to match magnetic value readout on the chart plotter comparable with the
value given by the compass of the boat. In other words, since the compass of the boat must be compen-
sated (due to the iron masses, ...), we use the same values given by the chart plotter. This means that, for
example, if the BRG to the next Waypoint readout in the chart plotter display is "X" Mag degree, if you
steer the boat reading "X" Mag degree from the compass, you are driving well toward the next Way-
point.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "COMPASS" + 'ENTER' + "CALIBRATION" +
'ENTER'
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorenz MAGNUM PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorenz MAGNUM PRO in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info